Abstract:Chemical composition plays a significant role in high-performance Bi 2 Sr 2 Ca 2 Cu 3 O 10+δ high-temperature superconductors (Bi-2223 HTS). Particularly, the Cu element can influence phase transformation, thus the superconducting performance in the Bi-2223 system. The precursor powders with different x wt. % Cu addition content ( x = 0, 1, 2, and 3) were fabricated using the spray pyrolysis (SP) method. Bi-2223 single-filamentary tapes were fabricated by the powder-in-tube process (PIT) using precursor powders with different Cu addition content. The influences of Cu addition content on the phase formation, microstructural, and superconducting performance of Bi-2223 tapes have been investigated. With the increase of Cu addition content, Bi-2223 phase formation activation energy decreases from 16293.6 to 8173.2 kJ/mol. This indicates that the addition of Cu can promote the formation of Bi-2223 phase. The highest Bi-2223 phase content is obtained with 1% Cu addition. The improved inter-grain connection could be attributed to both higher phase content and larger grain size. Therefore, the maximum critical current ( I c ) of 50 A at 77 K was achieved. On the other hand, the T c onset can be improved to 112 K in 2% Cu addition. The change of T c onset can be attributed to the formation of a nearly tetragonal lattice with proper composition. The results may also be applicable to the fabrication of multi-filamentary Bi-2223/Ag tapes with higher current capacity.

Investigate on the Application of Elliptical Drawing Dies During the Manufacturing Process of Bi-2223/Ag Superconducting Tapes

Investigation on Drawing Process of Bi-2223/Ag Wires Using Racetrack-Type Dies: Simulation and Experiments

The Influence of Tape Arrangements on the Critical Current of Bi-2223 Superconducting Current Leads

The Influence of Electroplastic Rolling on the Mechanical Deformation and Phase Evolution of Bi-2223/Ag Tapes

Numerical Simulation of Drawing Process for Bi Superconducting Single-filament Tape

The influence of the first heat-treatment on the critical current density of (Bi,Pb)-2223/Ag superconducting tapes

The influences of powder processing variables on the properties of Bi-2223/Ag tapes

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Analysis of Current Distributions in HTS Tapes of Superconducting Bipolar DC Energy Pipeline

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Study of air heat treatment on Bi-2223/Ag superconducting tapes

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

Improving phase transformation and superconducting performance of Bi-2223 tapes via Cu addition

Effect of Intermediate Deformation on the Texturing of Bi-2223/Ag Tapes

Homogeneity Study of Bi-2223/Ag Monofilamentary Tapes Using Hall Sensor Magnetometry

Study on the High Temperature Pressure Charging Procedure of Bi-2223/Ag Superconducting Tapes

The Effect of Hot Isostatic Pressure on the Microstructure and Critical Current of Bi-2223/Ag Superconducting Tapes

Improving Bi-2212 multi-filament wire quality and superconductivity by cryogenic drawing

Numerical Modelling of Bscco Powder Deformation in the Bi-2223/Ag Tape Rolling Process

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Research on the Radial Crimping Process for Stacked High-Temperature Superconducting Cable-in-Conduit Conductor