Abstract:This paper presents a 10-channel, 120 nW/channel, reconfigurable capacitance-to-digital converter (CDC) enabling sub- μW wearable sensing applications. The proposed multi-channel architecture supports 10 channels with a shared reconfigurable 6-bit differential analog-to-digital converter (ADC). The reconfigurable nature of the CDC enables adaptive sensing range and sensing speed based on the target application. Furthermore, the architecture performs both on/off-chip parasitic correction and baseline calibration to measure the change in capacitance ( ∆C), excluding baseline and parasitic capacitances. The experimental results show the measurement range of ∆C are 5.34 pF for 1x sensitivity and 1.8 pF for 3x sensitivity respectively. The capacitive divider-based architecture excludes power-hungry operational trans-impedance amplifiers for capacitance to voltage conversion, and the architecture supports programmable channel access to activate or deactivate each channel independently. The random interrupt protection logic avoids any broken sample or data error in a sampling window. Additionally, the channel monitoring logic helps keep track of specific channel information. The measured silicon result shows a total power consumption of 1.2 μW for 1.6 kHz sampling frequency when driven by a 32 kHz clock, which is 8.6x less than prior works. The CDC is also tested with DMMP (dimethyl-methylphosphonate) gas sensor in gas chromatography (GC). Implemented in 65 nm CMOS process, the 10-channel CDC occupies 0.251 mm2 of active area (0.0251 mm2/Ch).

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

A Combined Low Power SAR Capacitance-to-digital / Analog-to-digital Converter for Multisensory System

23.1 A 7.9Fj/conversion-Step and 37.12afrms Pipelined-SAR Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

An Energy-Efficient, High-Resolution Kt/c-Noise-canceled Pipelined-SAR Capacitance-to-Digital Converter with Incomplete-Settling-Based Correlated Level Shifting in 22-Nm CMOS

A 9.1μw Capacitance-to-Digital Converter for Pressure Sensor Systems

23.1 A 7.9fJ/Conversion-Step and 37.12aF<inf>rms</inf> Pipelined-SAR Capacitance-to-Digital Converter with kT/C Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

A 55fJ/conv-step hybrid SAR-VCO ΔΣ capacitance-to-digital converter in 40nm CMOS

An Energy-Efficient Hybrid SAR-VCO $\delta \sigma $ Capacitance-to-Digital Converter in 40-Nm CMOS

An Energy-Efficient Capacitive Sensor Readout Circuit With Zoomed Time-Domain Quantization

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

A 181.8db FoMs Zoom Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Dead Band Operation

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub- μW Robust Wearable Sensing

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

An Energy-Efficient Time-Domain Incremental Zoom Capacitance-to-Digital Converter.

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches

A Wide Measurement Range and Fast Update Rate Integrated Interface for Capacitive Sensors Array

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

A 12-Bit 100ms/s SAR ADC with Equivalent Split-Capacitor and LSB-Averaging in 14-Nm CMOS FinFET

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator