Abstract:This paper presents a 10-channel, 120 nW/channel, reconfigurable capacitance-to-digital converter (CDC) enabling sub- μW wearable sensing applications. The proposed multi-channel architecture supports 10 channels with a shared reconfigurable 6-bit differential analog-to-digital converter (ADC). The reconfigurable nature of the CDC enables adaptive sensing range and sensing speed based on the target application. Furthermore, the architecture performs both on/off-chip parasitic correction and baseline calibration to measure the change in capacitance ( ∆C), excluding baseline and parasitic capacitances. The experimental results show the measurement range of ∆C are 5.34 pF for 1x sensitivity and 1.8 pF for 3x sensitivity respectively. The capacitive divider-based architecture excludes power-hungry operational trans-impedance amplifiers for capacitance to voltage conversion, and the architecture supports programmable channel access to activate or deactivate each channel independently. The random interrupt protection logic avoids any broken sample or data error in a sampling window. Additionally, the channel monitoring logic helps keep track of specific channel information. The measured silicon result shows a total power consumption of 1.2 μW for 1.6 kHz sampling frequency when driven by a 32 kHz clock, which is 8.6x less than prior works. The CDC is also tested with DMMP (dimethyl-methylphosphonate) gas sensor in gas chromatography (GC). Implemented in 65 nm CMOS process, the 10-channel CDC occupies 0.251 mm2 of active area (0.0251 mm2/Ch).

A Wide Measurement Range and Fast Update Rate Integrated Interface for Capacitive Sensors Array

A Wide Dynamic Range And Fast Update Rate Integrated Interface For Capacitive Sensors Array

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

Digital Capacitance Measurement System Based on FPGA

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub- μW Robust Wearable Sensing

A 9.1μw Capacitance-to-Digital Converter for Pressure Sensor Systems

An Energy-Efficient 15-Bit Capacitive-Sensor Interface Based On Period Modulation

A Combined Low Power SAR Capacitance-to-digital / Analog-to-digital Converter for Multisensory System

An energy-efficient 15-bit capacitive sensor interface.

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

An Energy-Efficient Capacitive Sensor Readout Circuit With Zoomed Time-Domain Quantization

A 2.5 Mw 370 Mv/pf High Linearity Stray-Immune Symmetrical Readout Circuit for Capacitive Sensors

A Digital-Analog Hybrid System-on-Chip for Capacitive Sensor Measurement and Control.

A low-power high-linearity symmetrical readout circuit for capacitive sensors

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

Energy-Efficient Capacitive Sensor Interfaces

Analysis and Characterization of Capacitance Variation Using Capacitance Measurement Array