Abstract:This paper presents a 10-channel, 120 nW/channel, reconfigurable capacitance-to-digital converter (CDC) enabling sub- μW wearable sensing applications. The proposed multi-channel architecture supports 10 channels with a shared reconfigurable 6-bit differential analog-to-digital converter (ADC). The reconfigurable nature of the CDC enables adaptive sensing range and sensing speed based on the target application. Furthermore, the architecture performs both on/off-chip parasitic correction and baseline calibration to measure the change in capacitance ( ∆C), excluding baseline and parasitic capacitances. The experimental results show the measurement range of ∆C are 5.34 pF for 1x sensitivity and 1.8 pF for 3x sensitivity respectively. The capacitive divider-based architecture excludes power-hungry operational trans-impedance amplifiers for capacitance to voltage conversion, and the architecture supports programmable channel access to activate or deactivate each channel independently. The random interrupt protection logic avoids any broken sample or data error in a sampling window. Additionally, the channel monitoring logic helps keep track of specific channel information. The measured silicon result shows a total power consumption of 1.2 μW for 1.6 kHz sampling frequency when driven by a 32 kHz clock, which is 8.6x less than prior works. The CDC is also tested with DMMP (dimethyl-methylphosphonate) gas sensor in gas chromatography (GC). Implemented in 65 nm CMOS process, the 10-channel CDC occupies 0.251 mm2 of active area (0.0251 mm2/Ch).

A Combined Low Power SAR Capacitance-to-digital / Analog-to-digital Converter for Multisensory System

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

A 10 MS/s 10 bit SAR A/D Converter in RF System

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 9.1μw Capacitance-to-Digital Converter for Pressure Sensor Systems

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub- μW Robust Wearable Sensing

A 12-bit compact column-parallel SAR ADC with dynamic power control technique for high-speed CMOS image sensors

Design of a 0.2V 2.08nW 10-bit 1kS/s High Energy Efficiency SAR ADC with Dummy Capacitor Splitting Technique for Biomedical Applications

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

An 11-Bit 22-Ms/s 0.6 Mw Sar Adc with Parasitic Capacitance Compensation

A Digital-Analog Hybrid System-on-Chip for Capacitive Sensor Measurement and Control.

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

A Wide Measurement Range and Fast Update Rate Integrated Interface for Capacitive Sensors Array

A 455 Nw 220 Fj/conversion-Step 12 Bits 2 Ks/s SAR ADC for Portable Biopotential Acquisition Systems