Abstract:This paper presents a 10-channel, 120 nW/channel, reconfigurable capacitance-to-digital converter (CDC) enabling sub- μW wearable sensing applications. The proposed multi-channel architecture supports 10 channels with a shared reconfigurable 6-bit differential analog-to-digital converter (ADC). The reconfigurable nature of the CDC enables adaptive sensing range and sensing speed based on the target application. Furthermore, the architecture performs both on/off-chip parasitic correction and baseline calibration to measure the change in capacitance ( ∆C), excluding baseline and parasitic capacitances. The experimental results show the measurement range of ∆C are 5.34 pF for 1x sensitivity and 1.8 pF for 3x sensitivity respectively. The capacitive divider-based architecture excludes power-hungry operational trans-impedance amplifiers for capacitance to voltage conversion, and the architecture supports programmable channel access to activate or deactivate each channel independently. The random interrupt protection logic avoids any broken sample or data error in a sampling window. Additionally, the channel monitoring logic helps keep track of specific channel information. The measured silicon result shows a total power consumption of 1.2 μW for 1.6 kHz sampling frequency when driven by a 32 kHz clock, which is 8.6x less than prior works. The CDC is also tested with DMMP (dimethyl-methylphosphonate) gas sensor in gas chromatography (GC). Implemented in 65 nm CMOS process, the 10-channel CDC occupies 0.251 mm2 of active area (0.0251 mm2/Ch).

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

A Wide Measurement Range and Fast Update Rate Integrated Interface for Capacitive Sensors Array

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub- μW Robust Wearable Sensing

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

A 9.1μw Capacitance-to-Digital Converter for Pressure Sensor Systems

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

A switched-capacitor charge-balancing analog-to-digital converter and its application to capacitance measurement

An Energy-Efficient, High-Resolution Kt/c-Noise-canceled Pipelined-SAR Capacitance-to-Digital Converter with Incomplete-Settling-Based Correlated Level Shifting in 22-Nm CMOS

23.1 A 7.9Fj/conversion-Step and 37.12afrms Pipelined-SAR Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

A 2.5 Mw 370 Mv/pf High Linearity Stray-Immune Symmetrical Readout Circuit for Capacitive Sensors

23.1 A 7.9fJ/Conversion-Step and 37.12aF<inf>rms</inf> Pipelined-SAR Capacitance-to-Digital Converter with kT/C Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

A low-power high-linearity symmetrical readout circuit for capacitive sensors

A Combined Low Power SAR Capacitance-to-digital / Analog-to-digital Converter for Multisensory System

A Wide Dynamic Range And Fast Update Rate Integrated Interface For Capacitive Sensors Array

A low-noise switched-capacitor interface for a capacitive micro-accelerometer

A High-Voltage Closed-Loop SC Interface for a ± 50 G Capacitive Micro-Accelerometer with 112.4 Db Dynamic Range

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer

An Improved Switched Capacitor CFC for Capacitive Sensors Representable Using π-Model With Automatic Offset Elimination