Abstract:This article presents an adaptive zoom-capacitance-to-digital converter (CDC)-based CMOS humidity sensor. The humidity sensor is realized by means of two differential capacitors whose dielectrics are sensitive to humidity. The sensing capacitors are interfaced with a zoom CDC, which consists of a successive-approximation- register (SAR) analog-to-digital converter (ADC) and a 3rd-order delta-sigma modulator (Delta Sigma M). The SAR ADC eliminates the influence of the baseline capacitance to reduce the input range of the Delta Sigma M. To improve the energy efficiency of the CDC across the full input range, a power-aware floating inverter amplifier (FIA) array is proposed, which is configured based on the conversion results of the SAR logic. In addition, an adaptive range-shift (ARS) zoom CDC is proposed to: 1) resist off-chip parasitics and interference and 2) allow low redundancy and a more energy-efficient FIA-based comparator, thus reducing power consumption. The proposed CMOS humidity sensor is implemented in a 0.11-mu m CMOS process. Measurement results show a capacitance resolution of 17.9 aF and an effective number of bits (ENOB) of 14.0 within a conversion time of 1.01 ms. The proposed humidity sensor consumes 1.5 mu W of power and exhibits a 0.0094 % relative humidity (RH) resolution and a +/- 1.5 %RH peak-to-peak accuracy (3 sigma error of 5.5 %RH) among 12 chips from 20 to 85 % RH, and it achieves a figure of merit (FoM) of 0.135 pJ.%RH2, which is more than six times better than the state of the art.

Energy-Efficient Capacitive Sensor Interfaces

An energy-efficient 15-bit capacitive sensor interface.

An Energy-Efficient 15-Bit Capacitive-Sensor Interface Based On Period Modulation

An Energy-Efficient Capacitively Biased Diode-Based Temperature Sensor in 55-nm CMOS

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

Power-Efficiency Evolution of Capacitive Sensor Interfaces

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

Capacitor-Reused Cmos Temperature Sensor With Duty-Cycle-Modulated Output And 0.38 Degrees C (3 Sigma) Inaccuracy

Ultra-Low-Power Interface Chip for Autonomous Capacitive Sensor Systems

A Combined Temperature and Capacitance Sensor Interface

A Wide Dynamic Range And Fast Update Rate Integrated Interface For Capacitive Sensors Array

A 1.2V 8.3nJ energy-efficient CMOS humidity sensor for RFID applications

A 1.8V 11μW CMOS smart humidity sensor for RFID sensing applications

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

Energy-Efficient CMOS Humidity Sensors Using Adaptive Range-Shift Zoom CDC and Power-Aware Floating Inverter Amplifier Array

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

A Compact Sensor Readout Circuit with Combined Temperature, Capacitance and Voltage Sensing Functionality

A Wide Measurement Range and Fast Update Rate Integrated Interface for Capacitive Sensors Array

Comparison of Two Low-Power Electronic Interfaces for Capacitive Mems Sensors