Abstract:This article describes an energy‐efficient, low‐power CMOS temperature sensor suitable for portable applications. The sensor's front‐end circuitry is designed with a reference voltage (VREF ), complementary to absolute temperature (CTAT) voltage (VCTAT ), and ramp voltage generators. The ramp voltage (Vcap ) is produced by utilizing a current reference circuit. The ramp voltage is compared with independent and temperature‐dependent voltages to perform the voltage‐to‐frequency conversion. Conversion from frequency to digital output is achieved through an asynchronous counter with an on‐chip oscillator. The proposed design is realized in a 0.18‐μ m CMOS technology and attains a power usage of 604.4 nW at 27°C with an operating voltage of 0.5 V. Furthermore, it obtains an inaccuracy of +0.71/−0.73°C over ‐40°C to 125°C temperature range with an active area of 0.025 mm2. Moreover, the designed sensor circuit offers a resolution of 0.17°C with an energy conversion of 96.7 pJ. This article describes an energy‐efficient, low‐power CMOS temperature sensor suitable for portable applications. The sensor's front‐end circuitry is designed with a reference voltage (VREF ), complementary to absolute temperature (CTAT) voltage (VCTAT ), and ramp voltage generators. The ramp voltage (Vcap ) is produced by utilizing a current reference circuit. The ramp voltage is compared with independent and temperature‐dependent voltages to perform the voltage‐to‐frequency conversion. Conversion from frequency to digital output is achieved through an asynchronous counter with an on‐chip oscillator. The proposed design is realized in a 0.18‐μ m CMOS technology and attains a power usage of 604.4 nW at 27°C with an operating voltage of 0.5 V. Furthermore, it obtains an inaccuracy of +0.71/−0.73°C over −40°C to 125°C temperature range with an active area of 0.025 mm2. Moreover, the designed sensor circuit offers a resolution of 0.17°C with an energy conversion of 96.7 pJ.

A Compact Sensor Readout Circuit with Combined Temperature, Capacitance and Voltage Sensing Functionality

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

An Energy-Efficient Capacitively Biased Diode-Based Temperature Sensor in 55-nm CMOS

A 14-Bit Column-Parallel Two-Step SA ADC with Digital Calibration Based on Scaled References and Redundancy for CMOS Image Sensors

A 1-V Diode-Based Temperature Sensor with a Resolution FoM of 3.1pj•k2 in 55nm CMOS

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

Capacitor-Reused Cmos Temperature Sensor With Duty-Cycle-Modulated Output And 0.38 Degrees C (3 Sigma) Inaccuracy

A 0.26-Pj·k2 2400-Μm2 Digital Temperature Sensor in 55-Nm CMOS

Capacitor‐reused CMOS Temperature Sensor with Duty‐cycle‐modulated Output and 0.38°C () Inaccuracy

A 0.8V Capacitively-Biased BJT-Based Temperature Sensor with an Inaccuracy of ±0.4°C ($\mathbf{3}\mathbf{\sigma}$) from −40°C to 125°C in 22nm CMOS

Capacitor-reused CMOS temperature sensor with duty-cycle-modulated output and 0.38°C ( 3 σ ) inaccuracy

A Wide Dynamic Range And Fast Update Rate Integrated Interface For Capacitive Sensors Array

Energy-Efficient Capacitive Sensor Interfaces

A Combined Temperature and Capacitance Sensor Interface

An Energy‐Efficient Fully On‐Chip CMOS Temperature Sensor for Portable Applications With an RFoM of 2.79 pJ.K2

Wide Input Range Supply Voltage Tolerant Capacitive Sensor Readout Using On-Chip Solar Cell.

A low-power high-linearity symmetrical readout circuit for capacitive sensors

A Digital-Analog Hybrid System-on-Chip for Capacitive Sensor Measurement and Control.

A 9-Bit Resistor-Based All-Digital Temperature Sensor with a SAR-Quantization Embedded Differential Low-Pass Filter in 65nm CMOS Consuming 57pj with a 2.5 Μs Conversion Time.