Abstract:Many $\text{IoT}$ applications demand ADCs with high resolution, medium bandwidth, and good energy efficiency. Lately, the incremental ADC is drawing rising attention by favoring system integration with its easy multiplexing and simple digital filtering. By combining a low-power SAR with a low-distortion $\Delta\Sigma$ modulator, the zoom architecture achieves high energy efficiency and high resolution simultaneously [1–2]. However, the conventional zoom ADC can only convert quasi-static signals, since the two stages operate sequentially, and its $\Delta\Sigma$ conversion operates at a slow speed. The dynamic zoom architecture performs coarse and fine conversions concurrently, thus being able to convert varying inputs [3–4]. Yet, limited by the low quantization level of the fine $\Delta\Sigma \mathrm{M}$, it requires a large OSR for the targeted resolution (e.g., 282.25 in [3] and 87.5 in [4]), which restricts the input bandwidth to several tens of $\text{kHz}$, Moreover, its loop filter relies on charge transfer, where each conversion requires dedicated sampling for its residue generation. As a result, in addition to the limited input bandwidth, the largely repeated sampling operation incurs extra power and design challenge for input drivers. The CT zoom architecture features easy driving while still requiring a large conversion cycle of 8192 in [5]. Recently, the emerging noise-shaping (NS) SAR ADC employs the efficient SAR for the multi-bit quantizer, significantly reducing conversion cycles [6–7]. However, without the initial coarse quantization, high loop filter orders are usually required for hig h -resolution applications, raising significant hardware cost and design complexity.

A 181.8db FoMs Zoom Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Dead Band Operation

23.1 A 7.9Fj/conversion-Step and 37.12afrms Pipelined-SAR Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

18.2 A 16Fj/conversion-Step Time-Domain Two-Step Capacitance-to-Digital Converter

109.9-dB DR and 17.9-Bit ENOB Dynamic Zoom CDC Design for Audio Applications

23.1 A 7.9fJ/Conversion-Step and 37.12aF<inf>rms</inf> Pipelined-SAR Capacitance-to-Digital Converter with kT/C Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

An Energy-Efficient Time-Domain Incremental Zoom Capacitance-to-Digital Converter.

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

An Energy-Efficient, High-Resolution Kt/c-Noise-canceled Pipelined-SAR Capacitance-to-Digital Converter with Incomplete-Settling-Based Correlated Level Shifting in 22-Nm CMOS

An Energy-Efficient Capacitive Sensor Readout Circuit With Zoomed Time-Domain Quantization

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

A 9.7Fj/conv.-Step Capacitive Sensor Readout Circuit with Incremental Zoomed Time Domain Quantization.

A 172.5Db-Fom Hybrid CT/DT Incremental Σ∆Modulator for Direct Current-to-Digital Conversion

A 93.6Db-Sndr 5Khz-Bw Fully Dynamic Hybrid CT-DT Noise Shaping SAR ADC

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

An Energy-Efficient Hybrid SAR-VCO $\delta \sigma $ Capacitance-to-Digital Converter in 40-Nm CMOS

10.6 A 150Khz-Bw 15-ENOB Incremental Zoom ADC with Skipped Sampling and Single Buffer Embedded Noise-Shaping SAR Quantizer

A 55fJ/conv-step hybrid SAR-VCO ΔΣ capacitance-to-digital converter in 40nm CMOS

A 470μw 20Khz-Bw 107.3Db-Sndr Nested CT DSM Employing Negative-R-Based Cross-RC Filter and Weighted Multi-Threshold MSB-Pass Quantizer

An Energy-Efficient Discrete-Time Delta–Sigma Modulator with Dynamic-Range Enhancement and Tri-Level CDAC