Abstract:This graphical abstract presents a low‐power, high dynamic range second‐order delta‐sigma modulator (DSM) for sensing applications. The DSM employs a hybrid CIFF‐B architecture, consisting of a continuous‐time first stage and a discrete‐time second stage. The first stage, an OTA‐based RC integrator with anti‐aliasing properties, is chopped to mitigate offset and 1/f noise, while the second stage employs a switched‐capacitor integrator with OTA‐sharing to reduce complexity and enable signal addition before quantization. Fabricated in a 180‐nm CMOS process, the DSM achieves a 103 dB dynamic range in a 100 Hz bandwidth, with peak SNDR, SNR, and SFDR values of 95.8 dB, 97.1 dB, and 102.8 dB, respectively, and consumes 10.7 μ A from a 1.8 V supply. The Schreier figure‐of‐merit (FoMs) is 170.2 dB, highlighting its energy efficiency. This paper reports a low‐power, high dynamic range second‐order delta‐sigma modulator (DSM) for sensing applications. The DSM employs a hybrid CIFF‐B topology, consisting of a continuous‐time first stage and a discrete‐time second stage. The first stage is an OTA‐based RC integrator with inherent anti‐aliasing properties, while the second stage is a switched‐capacitor integrator. Offset and 1/f noise in the first stage are mitigated by the chopper‐stabilization technique, while those in the second stage are suppressed through the gain provided by the first stage. Furthermore, the OTA‐sharing technology is utilized in the second stage to realize signal addition before quantization, reducing design complexity. The hybrid DSM prototype is fabricated with a 180‐nm CMOS process and occupies an area of 0.123 mm2. Measurement results show peak SNDR/SNR/SFDR values of 95.8, 97.1, and 102.8 dB, respectively, with a current consumption of 10.7 μ A from a 1.8‐V single supply. The reported DSM achieves a 103‐dB dynamic range in a 100‐Hz signal bandwidth, corresponding to a Schreier figure‐of‐merit (FoMs) value of 170.2 dB.

A 172.5Db-Fom Hybrid CT/DT Incremental Σ∆Modulator for Direct Current-to-Digital Conversion

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A High-Performance,Low-Power ΣΔ Modulator for Digital Audio Applications

A Σδ Modulator Using Gain-Boost Class-C Inverter for Audio Applications.

An Audio Cascaded Sigma Delta Modulator Using Gain-Boost Class-C Inverter

A 0.18 Μm High Resolution Bandpass Delta-Sigma Modulator for Acceleration Transducer Applications

Modeling of a 200 KHz Bandwidth Low-pass Switch-capacitor Sigma-delta DAC with a Raised Spur-free Modulator

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

A 0.18 μm Single-poly CMOS ∑-△ Modulator for Digital Audio Applications

A 10.7‐μ A 103‐dB DR Hybrid Delta‐Sigma Modulator for Sensing Applications

A 1.2 V 2.3 Μw 94.7 Db DR Delta-Sigma Modulator with Dynamic-Range Enhancement and Tri-Level CDAC

A 181.8db FoMs Zoom Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Dead Band Operation

An Energy-Efficient Discrete-Time Delta–Sigma Modulator with Dynamic-Range Enhancement and Tri-Level CDAC

An Energy-Efficient Time-Domain Incremental Zoom Capacitance-to-Digital Converter.

23.1 A 7.9Fj/conversion-Step and 37.12afrms Pipelined-SAR Capacitance-to-Digital Converter with Kt/c Noise Cancellation and Incomplete-Settling-Based Correlated Level Shifting

A 9-Mw Continuous-Time Hybrid Active-Passive Sigma Delta Modulator With 84-Db Dynamic Range

A 187-dB FoM$_\textrm{S}$ Power-Efficient Second-Order Highpass $\Delta\Sigma$ Capacitance-to-Digital Converter

A 0.8-V 230-$\mu$ W 98-dB DR Inverter-Based $\Sigma \Delta$ Modulator for Audio Applications.

A 10-Khz BW 104.3-Db DR Discrete-Time Delta-Sigma Modulator with Ring-Amplifier-based Integrator

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers