Abstract:Fretting wear is one of the main factors restricting the fastener service reliability for the high -temperature titanium alloys. Enhancing the high -temperature fretting wear resistance of titanium alloys with laser cladding coatings is an effective method. Thus, in this work, a self-lubricating composite coating was designed and fabricated on the surface of TC21 titanium alloy with laser cladding. Special attentions were made to the effect of the fractions of the hard and self-lubricating phases on high -temperature fretting resistance. In addition, the contribution of laser cladding power was also concerned. The primary phases of the self-lubricating composite coatings are alpha-Co, CaF2, WC, TiC and Cr23C6, and the reasons for the formation of TiC and Cr23C6 are investigated from a thermodynamic point. The prepared composite coatings are dense and uniform. The crystallographic characteristics and the volume fractions of the hard phases (WC, TiC and Cr23C6) and self-lubricating phase (CaF2) were revealed, and the effect of grain size on the coating properties was analyzed. The hardness of the coatings were all maintained around 700 HV0.2, which was significantly higher than that of the substrate. The composite coating significantly improves the friction and wear resistance at 500 celcius. The hard phase was also found to be the most resistant to friction and wear. The frictional performance of the coating gets better when the hard phase and the self-lubricating phase increase. However, the hard phase contributes more to the hightemperature friction and wear resistance than the self-lubricating phase and the wear volume is 1/40 that of substrate. For the laser cladding power, the higher power can lead to a higher fraction of CaF2 but a lower fraction of hard phase, causing a decline in COF but an increase in wear volume. The wear mechanisms of the coating and the substrate were analyzed, the subsurface stress distribution state of the wear scars were further analyzed. The current results present new insights on the anti -wear design strategy to the composite coatings consist of hard and self-lubricating phase.

Revealing Fretting Wear Resistance Mechanism under Liquid Lead-Bismuth Eutectic of Cr-Al-C Composite Coatings Fabricated by Laser Cladding

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Fretting Wear Resistance at Ambient and Elevated Temperatures of 316 Stainless Steel Improved by Laser Cladding with Co-based Alloy/wc/caf2 Composite Coating

Fretting wear resistance at ambient and elevated temperatures of 316 stainless steel improved by laser cladding with Co-based alloy/WC/CaF 2 composite coating

Investigation On The Microstructure And Wear Behavior Of Laser-Cladded High Aluminum And Chromium Fe-B-C Coating

Enhancing High-Temperature Fretting Wear Resistance of TC21 Titanium Alloys by Laser Cladding Self-Lubricating Composite Coatings

Study on fabrication of multi-phase reinforcement coatings on Ti6Al4V by laser cladding for enhanced tribological performance

Enhancing High-Temperature Fretting Wear Resistance of Ti-64 Alloy by Laser Cladding Fecralmoxnby High Entropy Alloy Coatings

Microstructure and properties of Ti–Al–C composite coatings prepared by laser cladding

Surface microstructures and properties of oxide-reinforced FeCrAl matrix composite coatings prepared by laser cladding on a ferritic-martensitic steel

Microstructure and Performance of (Cocrni)88al6ti6-Cbn Composite Coatings by High-Speed Laser Cladding (HSLC): A Novel Strategy for Synergizing Wear-Resistance and Friction Reduction

Microstructure and Wear Resistance of Fe-Cr-Mo-Co-C-B Amorphous Composite Coatings Synthesized by Laser Cladding

Fabrication of Composite Coatings Containing In-Situ Reacted Ti2AlC/Ti2AlN MAX Phases by Laser Cladding and Investigation of Fretting Wear Mechanism

Research on the Preparation Process and Performance of a Wear-Resistant and Corrosion-Resistant Coating

Wear and Corrosion Resistance of CoCrNi Composite Coatings by Laser Cladding

Microstructure and performance of (CoCrNi) 88 Al 6 Ti 6 -cBN composite coatings by high-speed laser cladding (HSLC): A novel strategy for synergizing wear-resistance and friction reduction

High-temperature fretting wear behavior and microstructure stability of a laser-cladding Ti-Al-C-N composite coating meditated by variable cycle conditions

Microstructure evolution and tribological behavior of laser cladded Al 1.8 CrCuFeNi 2 /WC composite coatings on Ti-6Al-4 V

Wear performance of FeCuMoTiV high entropy alloy coatings by laser cladding

Microstructure and Friction-wear Properties of Laser Clad Cu-base Composite Coating on Al Alloy Surface

Competitive Relationship Between the FCC + BCC Dual Phases in the Wear Mechanism of Laser Cladding FeCoCrNiAl0.5Ti0.5 HEAs Coating