Abstract:P2-type Na0.67Mn0.75Fe0.25O2 cathode materials with low cost and high specific capacity have aroused much interest for sodium-ion batteries. Nevertheless, the cyclic and structural stabilities need to be improved for practical application. Herein, we tune the activity and reversibility of the cationic redox and the structure stability in Na0.67Mn0.75Fe0.25O2 by doping Mg/Ca/F into multi-Na/TM/O sites, respectively. The capacity performance at a high rate and cyclic stability are significantly enhanced. The mechanism of the synergy has been revealed by means of an X-ray photoelectronic spectrometer, neutron powder diffraction, ex situ/in situ X-ray diffraction, and so on. The improvement of the rate performance is mostly due to the broadening of the interlayer spacing caused by the element doping and the decrease of the Na-ion diffusion barrier, which facilitates Na-ion diffusion. The reduced transitional metal (TM)-O bond length demonstrates that the bonding energy has been strengthened, which benefits the structural stability and the cycling stability. Moreover, the synergy of multisite substitution suppresses the P2-OP4 phase transition at a high voltage and further improves the cycle stability. The Mg doping also activates Mn3+/Mn4+ redox and increases the intensity of Mn3+/Mn4+ redox. The ratio of Mn3+/Mn4+ is reduced by Ca substitution. Therefore, the Jahn-Teller effect, which is harmful to the structural stability, is restrained. The insights into the synergy of multisite substitution proposed in this study may also be helpful in the design of other cathode materials.

High Cycling Stability of MnO2 Cathode for Aqueous Mg-ion Batteries Enabled by Fe Doping

Structural Stability of P2-Na0.67Fe0.5Mn0.5O2 by Mg Doping

Co-doped MnO2 with abundant oxygen vacancies as cathode for superior aqueous magnesium ion storage

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

Structural Regulation of ZnMn2O4 cathode material by K, Fe-Double doping to improve its rate and cycling stabilityfor rechargeable aqueous zinc-based batteries

Co-doped MnO<sub>2</sub> with abundant oxygen vacancies as a cathode for superior aqueous magnesium ion storage

Realizing High-Capacity and Low-Strain Manganese-Based Sodium Cathode by Regulating the Doping Sites of Mg with a Post-Doping Approach

Dielectric polarization in MgFe2O4 coating and bulk doping to enhance high-voltage cycling stability of Na2/3Ni1/3Mn2/3O2 cathode material

Simultaneously Enhancing Structural Stability and Cationic Redox in Na<sub>0.67</sub>Mn<sub>0.75</sub>Fe<sub>0.25</sub>O<sub>2</sub> through a Synergy of Multisite Substitution

MnO 2 @Fe 2 O 3 Cathode for Aqueous Zinc/Manganese Batteries: Enhanced Discharge Capacity and Stability through Forming FeMnO 3

Stabilization of Li 2 MnO 3 phase by Mg doping suppressing irreversible oxygen loss and Mn ions migration

Dual Modification Strategies of Fe Doping and Carbon Coating for MnO Anode: A Facile Achieving Route and High Lithium Storage Performance

Stabilizing the High-Voltage Cycle Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Mg Doping

Fe doping mechanism of Na0.44MnO2 tunnel phase cathode electrode in sodium-ion batteries

Doping Regulation Stabilizing Δ-Mno2 Cathode for High-Performance Aqueous Aluminium-ion Batteries

A High-Performance MnO2 Cathode Doped with Group Ⅷ Metal for Aqueous Zn-ion Batteries: In-situ X-Ray Diffraction Study on Zn2+ Storage Mechanism

Enhancing Cyclic Performance of Lithium-rich Manganese-based Cathode via In-situ Co-doping of Magnesium and Fluorine

Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping

Dual Cation Doping Enabling Simultaneously Boosted Capacity and Rate Capability of MnO2 Cathodes for Zn//MnO2 Batteries

Surface Magnesium Substitution at Spinel Lithium Manganate 8a Tetrahedral Sites for Suppressed Manganese Dissolution and Enhanced Cycle Stability

Improvements in the Electrochemical Performance of Sodium Manganese Oxides by Ti Doping for Aqueous Mg-Ion Batteries