Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping

Yongpeng Liu,Bin He,Qian Li,Hao Liu,Lang Qiu,Jie Liu,Wei Xiang,Yuxia Liu,Gongke Wang,Zhenguo Wu,Xiaodong Guo

DOI: https://doi.org/10.1016/j.materresbull.2020.110923

IF: 5.6

2020-10-01

Materials Research Bulletin

Abstract:Li- and Mn-rich layered cathode materials (LMR) have been widely studied for their ultrahigh energy density. Unfortunately, the rapid potential decay and capacity degradation during cycling hinder their commercialization process. In this work, Mg2+ cation and PO4 3− polyanion dual elements coupling effect induced lattice modification strategy is developed to address these drawbacks for a typical lithium-rich material. The structural characteristic, chemical composition, valence state and elemental distribution of the materials are investigated by scanning electron microscopy, X-ray diffraction, inductively coupled plasma optical emission spectroscopy, focused ion beam and high-resolution transmission electron microscopy, respectively. Mg2+ and PO4 3− co-modified lithium-rich cathode material shows excellent electrochemical properties. It provides an improved initial coulombic efficiency of 87 % and ultrahigh initial discharge capacity of 307 mA h g-1 during a cut-off voltage of 2.0–4.8 V and a current density of 25 mA g-1. In conclusion, the Mg2+ and PO4 3− co-modified material exhibits not only significantly improved rate performance (150.7 mA h g−1 @ 5 C) but also markedly improved cycling stability (83 % @ 1 C @ 300 cycles).

materials science, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the capacity fading and voltage degradation issues that occur during the cycling process of lithium - manganese - based lithium - rich layered oxide cathode materials (Li - and Mn - rich layered oxides, denoted as LMR). Although these materials have an extremely high energy density, their commercial applications are hindered by the following factors:

1. **Low initial Coulombic efficiency**: There is a large irreversible capacity loss during the first charge - discharge process.
2. **Voltage decay**: In the deeply charged state, oxygen anions are inevitably oxidized, leading to the generation of oxygen vacancies, which in turn causes the transition metal cations to migrate into the lithium vacancies, making the material structure unstable and the voltage gradually decrease.
3. **Poor rate performance**: Due to the surface structure reconstruction increasing the interface resistance, which hinders the lithium - ion diffusion kinetics, resulting in poor rate performance.
4. **Limited cycle life**: As the number of cycles increases, the material transforms from the layered phase to the spinel phase or the cubic rock - salt phase, accelerating the voltage and capacity degradation.

To solve the above problems, the author proposes an innovative strategy, that is, by introducing the co - doping method of magnesium ions (\(\text{Mg}^{2+}\)) and phosphate ions (\(\text{PO}_4^{3-}\)) to improve the electrochemical performance of this lithium - rich layered oxide cathode material. Specifically, this method aims to enhance the material performance in the following ways:
- \(\text{Mg}^{2+}\) stabilizes the lithium layer, expands the lithium - layer spacing, and promotes the insertion and extraction of lithium ions;
- \(\text{PO}_4^{3-}\) enters the transition metal layer, slows down the transition metal migration, and enhances the structural stability of the material.

The experimental results show that this co - doping method significantly improves the initial Coulombic efficiency, high - rate performance, and cycle stability of the material. For example, the initial discharge capacity of the co - doped material reaches 307 mAh g\(^{-1}\) at 0.1 C, the high - rate performance at 5 C reaches 150.7 mAh g\(^{-1}\), and it still maintains 83% of the capacity retention rate after 300 cycles. These improvements are attributed to the synergistic effect of \(\text{Mg}^{2+}\) and \(\text{PO}_4^{3-}\), which effectively enhances the overall electrochemical performance of the material.