Abstract:A surface‐to‐bulk modification is proposed for Ni‐rich LiNi0.83Co0.06Mn0.11O2, creating an amorphous lithium phosphates outmost layer, a reconstructed NiO layer at the subsurface, and a gradient phosphorus doping in the bulk. The multifunctional structure effectively preserves its lattice integrity, prevents interfacial side reactions, and enhances cycle stability at high voltage and elevated temperature. Nickel‐rich cathode materials have gained popularity in the development of lithium‐ion batteries (LIBs) due to their high energy density, which exceeds 250 Wh kg−1. However, the instability of bulk and surface structures has significantly limited their industrial application. In this study, a three‐in‐one approach to synergistically modulate the structure of LiNi0.83Co0.06Mn0.11O2 (NCM83) from surface to bulk by a phytic acid (PA) coating is proposed. This surface treatment leads to the spontaneous formation of an amorphous lithium phosphates coating layer on the outermost surface, a reconstructed NiO layer at the subsurface, and a gradient P doping in the NCM83 bulk. The resulting hierarchical and multifunctional structure provides a facilitated surface Li‐ion conduction, a NiO‐stabilized subsurface with strong resistance toward side reactions between the electrode and electrolyte, a fast Li ion bulk diffusion endowed by the enlarged LiO6 slab due to the P doping, and an enhanced H2−H3 phase transition reversibility. As a result, the PA‐NCM83 sample exhibits excellent capacity retention with 72.4% after 300 cycles at 1 C within 2.8–4.45 V, and 69.8% after 200 cycles at an elevated temperature of 45 °C. This approach provides a facile and efficient method to stabilize Ni‐rich cathode materials for next‐generation high‐energy LIBs.

Bulk Mg-doping and Surface Polypyrrole-Coating Enable High-Rate and Long-Life for Ni-rich Layered Cathodes

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

One-step Surface-to-bulk Modification of Single-Crystalline Ni-rich Co-poor Cathodes for High-Rate and Long-Life Li-ion Batteries at High-Voltage Operations

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Surface-Modification of Doping and Coating Li1.2Ni0.2Co0.08Mn0.52O2 as a Long Life Cathode Material of Lithium-Ion Battery by Sodium Salt Treatment

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Optimizing Both Bulk and Surface Structure of Li‐Rich Layered Cathodes for Long‐Life and Safe Li‐Ion Batteries

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Superior Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode with the Stable Polypyrrole Coating and Boron Doping for Li-Ion Batteries

Dielectric polarization in MgFe2O4 coating and bulk doping to enhance high-voltage cycling stability of Na2/3Ni1/3Mn2/3O2 cathode material