Abstract:A feasible strategy for dual‐bulk doping with Al and Nb in ultrahigh‐Ni oxide cathode materials of LiNi0.96Co0.04O2 (NC) is designed to stabilize the bulk structure, suppress oxygen release, and achieve superior electrochemical performance. This study offers a practical perspective for the development of high‐energy‐density and long‐life Li‐ion batteries. The pursuit of high energy densities propels the design of next‐generation nickel‐based layered oxide cathodes. The utilization of low‐cobalt, ultrahigh‐nickel layered oxide cathodes, and the extension of operating voltages promise enhanced energy density. However, stability and safety face challenges associated with nickel content, including structural degradation, lattice oxygen evolution, and thermal instability. In this study, a promising strategy of Al and Nb dual‐bulk‐doping is presented in high‐Ni cathode materials of LiNi0.96Co0.04O2 (NC) to stabilize the bulk structure, suppress oxygen release, and attain superior electrochemical performance at high voltages. The introduction of Al and Nb effectively raises the migration energy of Ni2+ into Li sites and stabilizes lattice oxygen through strengthened Al─O and Nb─O bonds. Furthermore, the substitution of high‐valence Nb ions reduces the charge depletion of lattice oxygen and induces an ordered microstructure. The Al and Nb dual‐bulk‐doping strategy mitigates strain and stress associated with the H2↔H3 phase transition, reducing the generation and propagation of microcracks. The resulting Li(Ni0.96Co0.04)0.985Al0.01Nb0.005O2 (NCAN) cathode exhibits superior cycling stability, with a capacity retention of 77.8% after 300 cycles, even when operating at a high‐voltage of 4.4 V, outperforming the NC (48.5%). This work provides a promising perspective for developing high‐voltage and high‐Ni cathode materials.

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Enhancing the Electrochemical Performance of Ni-Rich LiNi0.88Co0.09Al0.03O2 Cathodes through Tungsten-Doping for Lithium-Ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Suppressing capacity fading and voltage decay of Ni-rich cathode material by dual-ion doping for lithium-ion batteries

Tungsten and Phosphate Polyanion Co-Doping of Ni-ultrahigh Cathodes Greatly Enhancing Crystal Structure and Interface Stability

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Enhancing Structural Rigidity of Ultrahigh‐Ni Oxide Through Al and Nb Dual‐Bulk‐Doping for High‐Voltage Lithium‐Ion Batteries

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

B2O3/LiBO2 dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Profiting the Co-Modifications of Li 2 SnO 3 Coating and Sn 4+ Doping in Co-Free Ni-Rich Cathode Particles for Lithium-Ion Batteries

Synergy of Epitaxial Layer and Bulk Doping Enables Structural Rigidity of Cobalt‐Free Ultrahigh‐Nickel Oxide Cathode for Lithium‐Ion Batteries

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy