Abstract:In recent years, P2-layered manganese-based cathodes have garnered considerable attention because of their exceptional capacity, high energy density, and facile synthesis. Nevertheless, the poor rate capability and inferior capacity retention at high discharge rates have limited their application in commercial batteries. In this work, we report a stable P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 layered oxide cathode material with both alkali metal site doping and transition metal site doping and confirm that the synergistic effect of the K–Mg–Zn system suppresses the phase transition of P2–O2 and reduces the activation energy of interfacial charge transfer. Furthermore, the introduction of the K–Mg–Zn system results in favorable cycling stability rate performance of the sample. Specifically, the initial discharge capacity at 0.1C is measured to 140.9 mAh g–1, with a capacity retention of 95.1% after 100 cycles at 1C. Remarkably, even after 2000 cycles at 20C, the capacity retention remains at 82.8%. Ex situ X-ray photoelectron spectroscopy (XPS) analysis and the density functional theory (DFT) calculation reveal that the charge compensation during the KNMMZ charging and discharging process can be interpreted as the cooperative action of Mn3+/Mn4+ and Ni2+/Ni3+/Ni4+ redox couples in the voltage range of 2–4 V, while peaks around 4.2 V are attributed to the anionic redox action. Ex situ X-ray diffraction (XRD) analysis reveals the pronounced capability of KNMMZ to effectively suppress the P2–O2 phase transition. The complex impedance measurements and the galvanostatic intermittent titration technique validate that the K–Mg–Zn system enhances the diffusion of sodium ions. Furthermore, the full cell demonstrates outstanding cyclic electrochemical performance, underscoring its exceptional stability and durability throughout multiple charge–discharge cycles. Consequently, the P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 system presents promising prospects for the advancement of high-energy SIBs in practical applications.

Dual Cation Doping Enabling Simultaneously Boosted Capacity and Rate Capability of MnO2 Cathodes for Zn//MnO2 Batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Activating the redox chemistry of MnO2/Mn2+ in aqueous Zn batteries based on multi-ions doping regulation

Zn‐doped hollow cubic MnO2 as a high‐performance cathode material for Zn ion batteries

Simultaneous Reversible Tuning of H+ and Zn2+ Coinsertion in MnO2 Cathode for High-Capacity Aqueous Zn-ion Battery

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

Regulating the zinc ion transport kinetics of Mn3O4 through copper doping towards high-capacity aqueous Zn-ion battery

Inhibition of Manganese Dissolution in Mn 2 O 3 Cathode with Controllable Ni 2+ Incorporation for High‐Performance Zinc Ion Battery

Co 2+/3+/4+ ‐Regulated Electron State of Mn‐O for Superb Aqueous Zinc‐Manganese Oxide Batteries

Co2+/3+/4+‐Regulated Electron State of Mn‐O for Superb Aqueous Zinc‐Manganese Oxide Batteries

A cation and anion dual-doping strategy in novel Li-rich Mn-based cathode materials for high-performance Li metal batteries

MnO Stabilized in Carbon‐Veiled Multivariate Manganese Oxides as High‐Performance Cathode Material for Aqueous Zn‐Ion Batteries

In-situ Regulated Competitive Proton Intercalation and Deposition/dissolution Reaction of MnO2 for High-Performance Flexible Zinc-Manganese Batteries

Triggering High Capacity and Superior Reversibility of Manganese Oxides Cathode via Magnesium Modulation for Zn//MnO2 Batteries

Simultaneously Enhancing Structural Stability and Cationic Redox in Na<sub>0.67</sub>Mn<sub>0.75</sub>Fe<sub>0.25</sub>O<sub>2</sub> through a Synergy of Multisite Substitution

Uncovering Synergistic Effects of Electrode/Electrolyte Toward Concerted Cathodic Structure Stabilization for Superior‐Performance Aqueous Zn‐δ‐MnO2 Battery

Inhibition Of Manganese Dissolution In Mn2o3 Cathode With Controllable Ni2+ Incorporation For High-Performance Zinc Ion Battery

High-performance Zn Battery with Transition Metal Ions Co-Regulated Electrolytic MnO2

Realizing High-Capacity and Low-Strain Manganese-Based Sodium Cathode by Regulating the Doping Sites of Mg with a Post-Doping Approach

Dual-modification of oxygen vacancies and PEDOT coating on MnO 2 nanowires for high-performance zinc ion battery

MnO 2 @Fe 2 O 3 Cathode for Aqueous Zinc/Manganese Batteries: Enhanced Discharge Capacity and Stability through Forming FeMnO 3