MnO Stabilized in Carbon‐Veiled Multivariate Manganese Oxides as High‐Performance Cathode Material for Aqueous Zn‐Ion Batteries

Wanwei Jiang,Haiting Shi,Xijun Xu,Jiadong Shen,Zhiwei Xu,Renzong Hu

DOI: https://doi.org/10.1002/eem2.12142

2020-12-23

Abstract:<p>Aqueous Zn‐ion battery has emerged as one of the most prospective energy storage devices due to its low cost, high safety, and eco‐friendliness. However, Zn‐ion batteries are bottlenecked by significant capacity fading during long‐term cycling and poor performance at high current rates. Here, we report an available cooperation of multivariate manganese oxides@carbon hybrids (MnO₂/MnO@C and MnO₂/Mn₃O₄@C) via a plasma‐assisted design as an attractive Zn‐ion cathode. Among them, the MnO₂/MnO@C cathode exhibits a reversible specific capacity of 165 mAh g⁻¹ over 200 cycles at a high rate of 0.5 A g⁻¹, possesses great rate performance with high capacities of 110 mAh g^‐1 and 100 mAh g^‐1 at a high rate of 0.8 A g^‐1 and 1 A g^‐1, respectively. The good cathode performance significantly results from the facile charge transfer and ions (Zn²⁺ and H⁺) insertion in the manganese oxides/carbon hybrids featuring phase stability behavior in the available cooperation of multivalence and carbon conductive substrates. This work will promote the Zn‐manganese dioxide system for the design of low‐cost and high‐performance aqueous rechargeable Zn‐ion batteries.</p>

materials science, multidisciplinary

What problem does this paper attempt to address?

The paper attempts to address the issues of significant capacity decay during long-term cycling and poor performance at high current rates in Aqueous Zn-ion batteries. Specifically, the paper aims to improve the electrochemical performance of zinc-ion battery cathode materials by designing and preparing composite materials of multivalent manganese oxides and carbon (MnO₂/MnO@C and MnO₂/Mn₃O₄@C) using plasma-assisted grinding technology. This includes enhancing reversible specific capacity, rate performance, and cycling stability.

### Main Issues:
1. **Capacity Decay**: Manganese-based materials experience rapid capacity decline during long-term cycling due to complex structural transformations and manganese dissolution.
2. **Performance at High Current Rates**: Manganese-based materials exhibit poor rate performance at high current rates, limiting their practical applications.

### Solutions:
- **Multivalent Manganese Oxides**: Introducing different valence states of manganese (such as Mn(II) and Mn(IV)) enhances the ion transport capability and structural stability of the material.
- **Carbon Coating**: The carbon coating layer not only improves the conductivity of the material but also acts as a buffer layer to protect the structural stability of manganese oxides, preventing severe volume changes during charge and discharge processes.
- **Plasma-Assisted Grinding**: Preparing composite materials using plasma-assisted grinding technology optimizes the microstructure and electronic structure of the materials, thereby improving electrochemical performance.

### Experimental Results:
- **High Specific Capacity**: The MnO₂/MnO@C cathode material exhibits a reversible specific capacity of 165 mAh g⁻¹ at a high current rate of 0.5 A g⁻¹ and remains stable after 200 cycles.
- **Excellent Rate Performance**: At high current rates of 0.8 A g⁻¹ and 1 A g⁻¹, the material shows high specific capacities of 110 mAh g⁻¹ and 100 mAh g⁻¹, respectively.
- **Long Cycling Stability**: At a high current rate of 2 A g⁻¹, the MnO₂/MnO@C cathode material maintains a discharge capacity of 50 mAh g⁻¹ after 5000 cycles.

### Conclusion:
This study significantly improves the electrochemical performance of aqueous zinc-ion battery cathode materials, particularly in terms of rate performance and long-term cycling stability at high current rates, by rationally designing composite materials of multivalent manganese oxides and carbon. This achievement provides new ideas and methods for developing low-cost, high-performance aqueous zinc-ion batteries.