Research on welding simulation for vacuum chamber test specimens

Mengling Shen,Zhichao Han,Jijin Xu,Jianjun Zhu,Na Liu,Jingyu Liao,Weidong Zhang

DOI: https://doi.org/10.1088/1742-6596/2760/1/012041

2024-01-01

Journal of Physics: Conference Series

Abstract:Abstract The vacuum chamber is an important component of nuclear fusion devices, and the deformation control of the welding process is relatively strict. In this paper, the isothermal multi-level cyclic loading tests have been conducted to explore a nonlinear mixed hardening mode, which can be used as the material input for the welding simulation. Then, welding simulation has been performed for test specimens of the vacuum chamber, and the deformation of test specimens has been obtained under different welding paths. After the first welding simulation is completed, the clamp and limiting plates have been designed based on the deformation of the test specimens. The welding simulation has been performed again with the clamp and limiting plates, in order to evaluate the rationality of the welding process and the design for the clamp and limiting plates. Finally, according to the determined welding process and design for the clamp and limiting plates, welding tests have been conducted, and the welding deformation has been measured. It is found that the difference between the measurement values of the tests and the simulation results is small, which implies that the welding simulation is reasonable.