Abstract:The efficiency of the textile hot air-drying process fundamentally requires the uniformity of the airflow that impinges on the textile fabric. Optimization of a stenter machine's hot air supply chamber shape was conducted in this paper, based on the actual real-size model and considering both the outlet flow uniformity and the standard velocity deviation as responses. The purpose is to improve the airflow uniformity at the chamber outlet, and modifications applied to the baseline must be applicable to both old and next-generation stenter machines. Coupled Computational Fluid Dynamics and Design of Experiment (CFD-DoE) optimization on the stenter machine chamber geometry was carried out. The CFD model was validated by measuring the chamber outlet velocity using a 2D velocity scanner. After choosing seven factors based on mechanical manufacturing and fluid dynamics theories, a main effect screening design was conducted to highlight relevant factors that influence the outlet airflow distribution. By fixing the best categorical factors, a central composite design (CCD) was applied using three other continuous factors to generate a quadratic prediction model that could be used to simultaneously maximize and minimize the uniformity index (UI) and the standard deviation (SD), respectively. With the embedded JMP SAS desirability function, the optimal value was calculated based on a statistical approach. Those values were used to design an optimal stenter air supply chamber that has been simulated with Fluent CFD code to validate the statistical prediction model. Finally, optimized geometry was obtained and experimentally validated. Results show that this new chamber improved by 16.48% for the uniformity index and 38.07% for the standard deviation.

The Optimization Design of Vacuum Chamber in Vacuum Electron Beam Welding Machine

Research on welding simulation for vacuum chamber test specimens

Development of precision numericed controlled high vacuum electron beam welding machine

Design of Ultrasonic Machining Device for Thin-Wall Cylinder of Air Compressor

Research on electronic optical monitoring technology and system design for vacuum electron beam welding process

Optimum design of stenter machine hot air supply chamber by coupling CFD & DOE

Vacuum laser welding equipment and method

Optimization of welding parameters on welding distortion and stress in S690 high-strength steel thin-plate structures

Optimized Design of Precision EDM Machine Tool based on CAE Simulation and Modal Testing Technology

Prediction of clamping deformation in vacuum fixture–workpiece system for low-rigidity thin-walled precision parts using finite element method

Structure Optimization of the High Frequency Laminate Vacuum Extruder Based on ANSYS

A Mechanical Structure-Based Design Method and Its Implementation on a Fly-Cutting Machine Tool Design

Research and Realization of the Method of Restraining the Flying Beam of the Laser Cutting Machine Deformation

Modeling and Optimization of Process Parameters of a DF-CCP Etcher Chamber

Defects Inhibition and Process Optimization for Thick Plates Laser Welding with Filler Wire

Process Optimization and Performance Evaluation on Laser Beam Welding of Austenitic/martensitic Dissimilar Materials

A study on laser keyhole welding in vacuum by computational fluid dynamics simulations with plume effect models

Optimization Design Combined Thermal & Deformation Evaluation for A Precision Hot-Pressing Furnace

Simulation Design of Spot Welding of Body Structure and Transfer Robot Workstation

Study on Vacuum Welding Process of Slab Laser Module

Optimized control of weld movement in the drawing process of laser tailored welded blanks