Abstract:Biomass gasification based on calcium looping sorption enhanced reforming (CLSER) has the advantages of generating syngas with high purity hydrogen and simultaneously capturing CO2 in process. This study first aims to develop a novel synthetic CaO-based sorbent, addressing its tar reduction potential and mechanical strength along with cyclic carbonation reactivity. The novel sorbent was synthesized by integrating CaO with iron catalyst and an inert support based on a two-step sol gel method. Comprehensive properties of the novel sorbent including chemical components, effects on biomass pyrolysis and tar reduction, cyclic CO2 capture reactivity, morphology, and mechanical strength were examined by using various methods and facilities. The characterized chemical and physical properties were also compared with pure CaO and two referenced synthetic sorbents. Results showed that a novel sorbent (Ca-Fe-Al) consisting of CaO, iron oxide (Fe2O3), and mayenite (Ca12Al14O33) was successfully synthesized. Evolutions of tar species and CO2 during wheat-straw pyrolysis were found to be lowered in the presence of Ca-Fe-Al as determined by thermogravimetric Fourier transform infrared (TG-FTIR). The enhanced evolutions of light gases such as CO, CH4, and CO2 at temperatures higher than 580 degrees C examined by thermogravimetry-mass spectrometry (TG-MS) indicated the catalysis effects of Ca-Fe-Al on biomass tar cracking and char decomposition. Different from CaO and other synthetic sorbents, Ca-Fe-Al sorbent showed increasing carbonation capacity and reactivity with growing cycle numbers. After being hydrated, the cyclic carbonation performance of Ca-Fe-Al sorbent became superior to other sorbents. Mechanical strength of Ca-Fe-Al sorbent was also greater than that of CaO and was more suitable for long term storage.

CO2 Capture Performance of Na2CO3/γ-Al2O3 Sorbent Modified with Organic Acid

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Porosity and Hydrophilicity Modulated Quaternary Ammonium-Based Sorbents for CO2 Capture

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Kilogram-scale production and pelletization of Al-promoted CaO-based sorbent for CO2 capture

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Development of sorbent materials for direct air capture of CO2

Investigation on a Novel CaO–Y2O3 Sorbent for Efficient CO2 Mitigation

A comparative study on energy efficient CO2 capture using amine grafted solid sorbent: Materials characterization, isotherms, kinetics and thermodynamics

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

CO 2 capture performance of CaO-based sorbent modified with torrefaction condensate during calcium looping cycles

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions

SGCS-made Ultrafine CaO/Al2O3 Sorbent for Cyclic CO2 Capture

Effective Capture of Carbon Dioxide Using Hydrated Sodium Carbonate Powders

The Carbon Challenge: Design, Synthesis, and Chemisorption Behavior of Solid Sorbents in Direct Air Capture of Carbon Dioxide

Application of the sol-gel technique to develop synthetic calcium-based sorbents with excellent carbon dioxide capture characteristics.