Abstract:In order to reverse the trend of increasing carbon dioxide (CO2) emissions, the development of efficient and economical CO2 trapping agents is an urgent necessity for the sustainable development of industry. In this paper, hierarchical porous hydroxyl aluminum oxide (AlOOH) hollow microspheres with controllable structure and morphology were prepared by conventional hydrothermal synthesis using malonic acid as a structure guiding agent. Then, potassium carbonate (K2CO3) based adsorbents were prepared using AlOOH hollow microspheres as supports, and their CO2 trapping performance was assessed by simulating industrial flue gas flow in a fixed bed. The results show that the loading of K2CO3, the pore structure, and the surface basic site of the adsorbent have a significant influence on the trapping performance of CO2. Among the prepared K2CO3/AlOOH adsorbents, 30 wt% K2CO3/AlOOH adsorbent has the best CO2 capture ability, which is about 2.15 times higher than that of K2CO3/C–Al2O3 adsorbent prepared from commercial alumina (C–Al2O3). There may be two explanations for this. Firstly, it may be due to the nanostructured shell and hierarchical porous structure of the adsorbent, which reduces the intra-particle diffusion resistance of CO2, and secondly, it may be due to the suitable surface basic sites of the adsorbent. In addition, the adsorbent was regenerated at 120 °C after trapping CO2, and then CO2 was captured in a cycle. It was found that the CO2 capture capability of the adsorbent did not decrease significantly after 10 cycles. In this work, an excellent technique for preparing porous honeycomb adsorbents with suitable surface basic sites has been devised, which provides a creative strategy for capturing and utilizing CO2.

Effective Capture of Carbon Dioxide Using Hydrated Sodium Carbonate Powders

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Study of CO2 Capture by Seawater and Its Reinforcement

The Latest Advances in Carbon Dioxide Capture Technologies

Quest for optimal nanoconfinement for hydrate-based CO2 capture

Application of the sol-gel technique to develop synthetic calcium-based sorbents with excellent carbon dioxide capture characteristics.

Efficient CO(2) Capture by Porous, Nitrogen-Doped Carbonaceous Adsorbents Derived from Task-Specific Ionic Liquids.

Capturing Carbon Dioxide from Air with Charged-Sorbents

Facile Preparation of Porous CaMgAl Hydrotalcite-Like Derived Mixed Oxides through Alkaline Etching of KOH for CO2 Capture

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures

Enhanced CO 2 hydrate formation using hydrogen-rich stones, L-Methionine and SDS: Insights from kinetic and morphological studies

A hybrid absorption-adsorption method to efficiently capture carbon

Hierarchical porous AlOOH hollow microspheres for efficient CO2 capture

Reactivation of calcium-based sorbent by water hydration for CO2 capture

Parametrical Study on CO2 Capture from Ambient Air Using Hydrated K2CO3 Supported on an Activated Carbon Honeycomb

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.