Abstract:Emissions reduction and greenhouse gas removal from the atmosphere are both necessary to achieve net-zero emissions and limit climate change.1 There is thus a need for improved sorbents for the capture of carbon dioxide from the atmosphere, a process known as direct air capture. In particular, low-cost materials that can be regenerated at low temperatures would overcome the limitations of current technologies. In this work, we introduce a new class of designer sorbent materials known as “charged-sorbents”. These materials are prepared through a battery-like charging process which accumulates ions in the pores of low-cost activated carbons, with the inserted ions then serving as adsorption sites for carbon dioxide adsorption. We use our charging process to accumulate reactive hydroxide ions in the pores of a carbon electrode, and find that the resulting sorbent material can rapidly capture carbon dioxide from ambient air via (bi)carbonate formation. Unlike traditional bulk carbonates, charged-sorbent regeneration can be achieved at low temperatures (90-100 ºC), and the sorbent's conductive nature permits direct Joule heating regeneration2,3 using renewable electricity. Given their highly tailorable pore environments and low cost, we anticipate that charged-sorbents will find numerous potential applications in chemical separations, catalysis, and beyond.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a new low - cost material - "charged - sorbents" for directly capturing carbon dioxide (CO\(_2\)) from the atmosphere, in order to achieve more efficient carbon capture technologies. Specifically, this research aims to insert reactive hydroxide ions into porous carbon electrodes by electrochemical methods to form a new type of adsorbent material that can quickly capture CO\(_2\), and this material can be regenerated by Joule heating at a lower temperature, thereby overcoming the high energy consumption problem in existing technologies. ### Main problems 1. **Reducing the cost of carbon capture**: Existing carbon capture technologies usually need to be regenerated at high temperatures, which is not only energy - intensive but also expensive. This research hopes to reduce costs by developing adsorbent materials with a low regeneration temperature. 2. **Improving the efficiency of carbon capture**: Traditional carbon capture materials have limited adsorption capacity at low pressures. This research aims to develop materials that can efficiently capture CO\(_2\) at low pressures. 3. **Realizing a carbon capture process driven by renewable energy**: By utilizing the conductive properties of charged sorbents, Joule - heating regeneration using renewable energy (such as solar or wind energy) can be achieved, thereby reducing dependence on fossil fuels. ### Research background - **Direct Air Capture (DAC)**: It is a technology for directly capturing CO\(_2\) from the atmosphere and is crucial for achieving net - zero emissions and mitigating climate change. - **Limitations of existing technologies**: Traditional DAC technologies usually use alkaline solutions (such as KOH) or solid calcium hydroxide as adsorbents, but the regeneration of these materials needs to be carried out at a high temperature above 900°C, resulting in high energy consumption and high cost. - **Advantages of charged sorbents**: By inserting hydroxide ions into porous carbon electrodes by electrochemical methods to form charged sorbents, this material can be regenerated at a low temperature of 90 - 100°C and can be directly regenerated by Joule heating without additional heating equipment. ### Research methods - **Material preparation**: Use cheap activated carbon cloth as an electrode and insert hydroxide ions into the pores of the carbon electrode by charging in a 6M KOH aqueous solution. - **Performance testing**: Evaluate the CO\(_2\) capture performance and stability of charged sorbents by means of CO\(_2\) adsorption isotherm measurement, microcalorimetry, thermogravimetric analysis (TGA) and solid - state nuclear magnetic resonance (NMR). - **Practical application testing**: Conduct direct air capture experiments in simulated dry air and humid air and verify its recyclability through Joule - heating regeneration. ### Research results - **Enhanced CO\(_2\) capture ability**: Charged sorbents show significantly enhanced CO\(_2\) capture ability at low pressures, especially under the conditions of 0.4 mbar and 25°C, with a CO\(_2\) capacity reaching 0.26 ± 0.06 mmol g\(^{-1}\). - **Low regeneration temperature**: Charged sorbents can be regenerated by Joule heating at a low temperature of 90 - 100°C, and CO\(_2\) is completely released during the regeneration process. - **Good stability and cycling performance**: Charged sorbents show stable performance in multiple adsorption - desorption cycles and can maintain a high CO\(_2\) capture ability even in a humid environment. ### Prospects - **Future research directions**: Further optimize the preparation process of charged sorbents to improve their CO\(_2\) capture capacity and energy efficiency. - **Application prospects**: In addition to direct air capture, charged sorbents may also find wide applications in fields such as chemical separation and catalysis. In conclusion, this research proposes a new type of charged sorbent material, which is expected to play an important role in achieving efficient and low - cost carbon capture technologies.

Capturing Carbon Dioxide from Air with Charged-Sorbents

Capturing carbon dioxide from air with charged-sorbents

Development of sorbent materials for direct air capture of CO2

Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis.

The Carbon Challenge: Design, Synthesis, and Chemisorption Behavior of Solid Sorbents in Direct Air Capture of Carbon Dioxide

Capturing CO2 in Flue Gas from Fossil Fuel-Fired Power Plants Using Dry Regenerable Alkali Metal-Based Sorbent

Direct Air Capture of CO2 by Physisorbent Materials

Sorbent-coated carbon fibers for direct air capture using electrically driven temperature swing adsorption

Preparation and Kinetics of a Heterogeneous Sorbent for CO 2 Capture from the Atmosphere

CO2 Capture at Medium to High Temperature Using Solid Oxide-Based Sorbents: Fundamental Aspects, Mechanistic Insights, and Recent Advances.

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures

High-Capacity and Low-Cost Carbon-Based "molecular Basket" Sorbent for Co2 Capture from Flue Gas

Kinetic research on ion exchange regeneration of quaternary ammonium-based CO 2 sorbent for direct air capture

Characterization of kinetic limitations to atmospheric CO2 capture by solid sorbent

Porous Polymeric Electrodes for Electrochemical Carbon Dioxide Capture

Efficient CO(2) Capture by Porous, Nitrogen-Doped Carbonaceous Adsorbents Derived from Task-Specific Ionic Liquids.

Carbon dioxide capture by adsorption of carbonaceous materials with direct-electrothermal desorption

Lime-based sorbents for high-temperature CO2 capture--a review of sorbent modification methods

CO2 Capture by Li4SiO4 Sorbents and Their Applications: Current Developments and New Trends

A hybrid absorption-adsorption method to efficiently capture carbon

Progress in carbon dioxide capture materials for deep decarbonization