Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Properties of a Nano CaO/Al2O3 CO2 Sorbent

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

LiNaCO3‐Containing Porous Carbon Composites for CO2 capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study

Highly Efficient CO2 Adsorption by Nitrogen-Doped Porous Carbons Synthesized with Low-Temperature Sodium Amide Activation

Hierarchically Porous Mg-MOF-74/Sodium Alginate Composite Aerogel for CO 2 Capture

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Synthesis of CaO-based Sorbents Through Incorporation of Alumina/aluminate and Their CO2 Capture Performance

Efficient Capture of CO2 over Ordered Micro-Mesoporous Hybrid Carbon Nanosphere

CO2 Adsorption Performance of Na/K-Impregnated MgO

Efficient CO(2) Capture by Porous, Nitrogen-Doped Carbonaceous Adsorbents Derived from Task-Specific Ionic Liquids.

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO2 Capture Application

Development of CaO-based Adsorbents Loaded on Charcoal for CO2 Capture at High Temperature

Synthesis And Characterization Of Cao Nanopods For High Temperature Co2 Capture

Promoting Effects of Li3PO4 and CaCO3 on the Intermediate-Temperature CO2 Adsorption over Molten NaNO3-promoted MgO-based Sorbents

Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent