Abstract:The rapidly increasing atmospheric CO2 concentration has driven research into the development of cost- and energy-efficient materials and processes for the direct air capture of CO2 (DAC). Solid-supported amine materials can give high CO2 uptakes and acceptable sorption kinetics, but they are generally prepared in powder forms that are likely not practically deployable in large-scale operations due to significant pressure drops associated with packed-bed gas-solid contactors. To this end, the development of effective gas-solid contactors for CO2 capture technologies is important to allow processing high flow rates of gas with low-pressure drops and high mass transfer rates. In this study, we demonstrate new laminate-supported amine CO2 sorbents based on the impregnation of low-molecular-weight, branched poly(ethyleneimine) (PEI) into an expanded poly(tetrafluoroethylene) (ePTFE) sheet matrix containing embedded silica particles to form free-standing sheets amenable to incorporation into structured gas-solid contactors. The free-standing sheets are functionalized with PEI using a highly scalable wet impregnation method. This method allowed controllable PEI distribution and enough porosity retained inside the sheets to enable practical CO2 capacities ranging from 0.4 to 1.6 mmol CO2/gsorbent under dry conditions. Reversible CO2 capacities are achieved under both dry and humid temperature swing cycles, indicating promising material stability. The specific thermal energy requirement for the regeneration based on the measured CO2 and water capacities is 287 kJ/mol CO2, where the molar ratio of water to CO2 of 3.1 is achieved using hydrophobic materials. This is the lowest molar ratio among published DAC sorbents. A larger laminate module is tested under conditions closer to larger-scale operations (linear velocities 0.03, 0.05, and 0.1 m/sec) and demonstrates a stable capacity of 0.80 CO2/gsorbent over five cycles of CO2 adsorption and steam regeneration. The PEI-impregnated ePTFE/silica composite sorbent/contactors demonstrate promising DAC performance derived from the amine-filled silica particles contained in hydrophobic ePTFE domains to reduce water sorption and its concomitant regeneration energy penalty.

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.

Harnessing the Hybridization of a Metal‐Organic Framework and Superbase‐Derived Ionic Liquid for High‐Performance Direct Air Capture of CO2 (Small 41/2023)

The Carbon Challenge: Design, Synthesis, and Chemisorption Behavior of Solid Sorbents in Direct Air Capture of Carbon Dioxide

Development of sorbent materials for direct air capture of CO2

Recent Advances of Porous Solids for Ultradilute CO2 Capture

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Reversible and Robust CO2 Capture by Equimolar Task-Specific Ionic Liquid–superbase Mixtures

Sorption direct air capture with CO2 utilization

Carbon Dioxide Capture by Superbase‐Derived Protic Ionic Liquids

Revealing the correlation between the performance of silica-based DAC adsorbents and their pore natures

Reversible Co2 Capture by Conjugated Ionic Liquids Through Dynamic Covalent Carbon-Oxygen Bonds

Quaternized Plant-Based Porous Biochar for Direct Air Capture of CO 2 by Moisture-Swing Adsorption

Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2

Novel Fluid Ionic Liquid Composites with Self-Assembled Porosity and Chemical Sites for Facilitating CO 2 Separation

Novel Fluid Ionic Liquid Composites with Self-Assembled Porosity and Chemical Sites for Facilitating CO2 Separation

Efficient and Reversible Chemisorption of Carbon Dioxide with Dianionic-Functionalized Ionic Liquid-Based Solvents

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO2

Recent progress on direct air capture of carbon dioxide