Dual-functionalized ionic liquid biphasic solvents with aqueous-lean for industrial carbon capture: Energy-saving and high efficiency
Jiaming Mao,Yanbin Yun,Meng Li,Wenli Liu,Chang Li,Liming Hu,Jia Liu,Lihua Wang,Chunli Li
DOI: https://doi.org/10.1016/j.seppur.2023.123722
IF: 8.6
2023-04-04
Separation and Purification Technology
Abstract:A novel, sustainable, dual-functionalized amino ionic liquid biphasic solvent of 3-(Dimethylamino)-1-propylamine-1,2,4-triazole/poly (ethylene glycol) dimethyl ether/water ([DMAPA][TZ]/NHD/water) was proposed for CO 2 capture to reduce the consumption of regeneration energy. Experimental results showed that the CO 2 absorption loading of the solvent was 1.95 mol CO 2 ·L −1 solvent at a CO 2 partial pressure of 15 kPa. The volume of the CO 2 -rich phase was 40 vol% of the total volume, with a loading of up to 4.65 mol CO 2 ·L −1 solvent, accounting for approximately 95.4% of the blended CO 2 loading in the solvent. The CO 2 -rich phase could be regenerated by 92.3% in 10 min at 373 K, without the presence of a lean phase. The regeneration efficiency of the solvent was maintained at 83% after 10 adsorption and desorption cycles. The reaction, regeneration, and phase-change mechanism were investigated using 13 C NMR and phase composition analysis. CO 2 reacted with [DMAPA][TZ] to form two kinds of carbamate during solubilization, and all carbamates could be further hydrolyzed to form HCO 3 − and CO 3 2− . The solvent effect, phase-change behavior, and CO 2 physical dissolution of NHD could promote the absorption and desorption rate and absorption capacity of CO 2 . The energy consumption for CO 2 desorption could be reduced to 1.335 GJ·t −1 CO 2 , which was 67% lower than that of 30 wt% ethanolamine (3.99 GJ·t −1 CO 2 ), given the lower heat of reaction, specific heat capacity, and solvent loss. Thus, this solvent presents a sustainable strategy for advancing carbon capture technologies.
engineering, chemical