Abstract:Ultrasonic transducers are vital components for transmitting and receiving sound waves, which are customized to specific applications based on their operating frequencies.Small-sized high-frequency ultrasonic transducers have gained considerable attention and adoption in medical ultrasound imaging and small pipe flow testing. However, the significant impact of attenuation on high-frequency ultrasound restricts detection distance and degrades the signal-to-noise ratio. Additionally, thin-film high-frequency ultrasound transducers exhibit low output sound pressure, due to their low resonance displacement. In this study, we present an innovative approach to address these challenges through the design of an integrated small-size honeycomb-type top, two-electrode aluminum nitride (AIN)-based high-frequency ultrasonic transducer. A comprehensive investigation of the relationship between transducer size, sensitivity, and transmitted sound pressure levels is conducted. Leveraging microelectromechanical systems (MEMS) micro-nano-machining technology, we fabricate a 14 × 13 array with a unit diameter of 50 μm, and a matching circuit is employed to enhance the transducer's amplitude. Experimental results demonstrate remarkable transmit sound pressure levels (SPL) exceeding 210 dB (re:1 μPa/V) at a distance of 2 cm, with a maximum transmit SPL of 233 dB, and the receive sensitivity surpasses − 175 dB (re:1 V/μPa) and, at the 5 MHz resonance, the sensitivity reaches − 143 dB (re:1 V/μPa). Moreover, the transmit and receive linearity values demonstrate 99% and 98%, respectively. Our findings highlight the significant potential of the proposed high-frequency ultrasonic transducer for a diverse range of applications.

Fully Impedance-Matched High-Overtone Bulk Acoustic Wave Resonators Using 2DEG Electrodes

Metal-Free High-Overtone Bulk Acoustic Resonators With Outstanding Acoustic Match and Thermal Stability

Impedance-matched High-overtone Bulk Acoustic Resonator

Broad tuning low noise ku band dielectric resonators oscillators

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

GaN Micromechanical Resonators with Meshed Metal Bottom Electrode

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

High frequency guided mode resonances in mass-loaded, thin film gallium nitride surface acoustic wave devices

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Theoretical analysis of bulk acoustic wave resonators with emerging ε -Ga2O3 piezoelectric film

Beyond 5 GHz excitation of a ZnO-based high-overtone bulk acoustic resonator on SiC substrate

SiC Cantilevers For Generating Uniaxial Stress

Geometry Characteristics and Wide Temperature Behavior of Silicon-Based GaN Surface Acoustic Wave Resonators with Ultrahigh Quality Factor

Enhanced high-frequency piezoelectric ultrasonic transducer based on integrated AlN honeycomb structure

High-Frequency Surface Acoustic Wave Devices Based on ZnO/SiC Layered Structure

Solidly Mounted Resonators with Ultra‐High Operating Frequencies Based on 3R‐MoS2 Atomic Flakes

Broadband Acoustic Energy Harvesting Metasurface with Coupled Helmholtz Resonators

Broadband Gradient Impedance Matching Using an Acoustic Metamaterial for Ultrasonic Transducers

S-band High Passive Gain Resonant Transformers Based on Aluminum Nitride FBAR Resonators

X-Band Bulk Acoustic Wave Resonators with High Figure of Merit Based on Al0.8Sc0.2N

High- Integrated CMOS-MEMS Resonators With Deep-Submicrometer Gaps and Quasi-Linear Frequency Tuning