Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Note on the Breakdown Process and Preionization Mechanism in a Four-Electrode Self-Triggered Switch

Comparative Study of Pulsed Breakdown Processes and Mechanisms in Self-Triggered Four-Electrode Pre-Ionized Switches

Breakdown Processes and Mechanisms of Preionized Nitrogen Spark Gaps Under Sub-Microsecond Pulses

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

A Calculation Model For Breakdown Time Delay And Jitter Of Gas Switches Under Hundred-Nanosecond Pulses And Its Application In A Self-Triggered Pre-Ionized Switch

Time Delay Statistics Modeling of Megavolt Self-Triggered Pre-Ionized Switch under Nanosecond Pulses

Investigation on Breakdown Characteristics of a Pulsed Gas Switch and Influence of Pre-Ionization

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Optimization of a Nanosecond Pre-Ionization Switch’s Breakdown Jitter Characteristic Based on a Probability Distribution Model of Electron Avalanche’s Initiation

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Design and investigation of a capacitance-coupling pre-ionized sharpening switch

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

Fast breakdown process and characteristics diagnosis of nanosecond pin-pin discharge

Preliminary Research on Breakdown Mechanism of Gas Switch

Influence factors and improvement scheme on the breakdown behavior of pseudospark switch

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Closing mechanism of electrically-triggered vacuum surface flashover switch

The Breakdown Process in an Atmospheric Pressure Nanosecond Parallel-Plate Helium/Argon Mixture Discharge

Impact of overvoltage on the mode transition of the spark gap switch: from edge breakdown to stochastic breakdown

Development of P-C Switch with Adjustable Gap