Abstract:Ammonia is harmful to human health, however, the detection limit of the sensor based on traditional semiconductor gas sensors is high and the speed is slow. Constructing heterostructure is an effective method to improve the performance of sensors. In this article, 1-D MoO3 nanorods and SnO2 nanoparticles are successfully combined to obtain MoO3/SnO2 nanocomposite. The 1-D structure can increase the speed of electron transport, while the nanoparticles on the surface increase the specific surface area, more importantly, the structure maximizes the interface area between the two materials which can transfer electronic more efficiently. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH) are used to analyze the microstructure and elemental composition of MoO3/SnO2. The diameter of MoO3/SnO2 nanocomposite is approximately 200 nm and the distribution is uniform. The response of MoO3/SnO2 nanocomposite to 100-ppm NH3 is 12.7 at 280 °C, and the response/recovery time is 13/2 s. The detection limit for NH3 can reach 10 ppb (response 1.3), which enables rapid detection of NH3 at low concentration. Electron transport requires more energy to overcome the contact barrier between pure SnO2 nanoparticles, which can also lead to electron emission and noise increase. However, the sensitive electrons of MoO3/SnO2 nanocomposite can transmit electrons along the 1-D rod-like structure of MoO3, which undoubtedly accelerates the efficiency of electron transmission. Moreover, n-n heterojunction formed between MoO3 and SnO2 to bend the SnO2 band and show better sensitivity to NH3. Therefore, MoO3/SnO2 nanocomposite shows a low detection limit and a rapid response/recovery speed. Nevertheless, the nanoparticles on the surface of MoO3/SnO2 nanocomposite begin to agglomerate with the increase of SnO2 content, which leads to the decrease of gas-sensitive response. The formation process of MoO3/SnO2 composites is also discussed in this article. The excellent gas sensing results show that MoO3/SnO2 composites are a promising gas sensing material.

A Portable Electrochemical Room-Temperature Sensor Based on Flower-Like Structure UIO-66-NH2@MoS2 Composite for Ammonia Detection

High-performance Ammonia Sensor at Room Temperature Based on 2D Conductive MOF Cu3(HITP)2

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

PEDOT/flower-like 1 T-2H MoS2/nitrogen-doped graphene ternary nanocomposite for efficient room temperature real-time monitoring of ammonia

Enhancing Ammonia Sensing Performance of Ag 2 MoO 4 -based Mixed-Potential Sensor by Introducing Ionic and Electronic Conductance

Suspended SnS2 Layers by Light Assistance for Ultrasensitive Ammonia Detection at Room Temperature

Pt/MoS2/Polyaniline Nanocomposite as a Highly Effective Room Temperature Flexible Gas Sensor for Ammonia Detection

MoO 3 /SnO 2 Nanocomposite-Based Gas Sensor for Rapid Detection of Ammonia

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

MoS2-Templated Porous Hollow MoO3 Microspheres for Highly Selective Ammonia Sensing Via a Lewis Acid-Base Interaction

Highly Sensitive Room-Temperature Detection of Ammonia in the Breath of Kidney Disease Patients Using Fe2Mo3O8/MoO2@MoS2 Nanocomposite Gas Sensor

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

2D/2D Dy 2 O 3 Nanosheet/MoO 3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection

Graphene Oxide-Coated Mach-Zehnder Interferometer Based Ammonia Gas Sensor

Sub-ppt NH3 detection by MoS2@sulfur nanosheets

Fabrication of robust and cost-efficient Hoffmann-type MOF sensors for room temperature ammonia detection

Molecular ammonia sensing of PEDOT:PSS/nitrogen doped MXene Ti 3 C 2 T x composite film at room temperature

Ammonia sensing properties of metal–organic frameworks-derived zinc oxide/reduced graphene oxide nanocomposite

Preparation of MoS2 Nanospheres using a Hydrothermal Method and Their Application as Ammonia Gas Sensors Based on Delay Line Surface Acoustic Wave Devices

Porous MoO 3 nanosheets for conductometric gas sensors to detect diisopropylamine