Abstract:Abstract The irrational NH 3 emission routinely poses a significant threat to human health and environmental protection even at low dose. In addition, high miniaturization and low power-consumption has been the critical requirements of Internet of Things. To meet these demands, it is greatly pressing to develop a novel gas sensor with the capability to detect trace NH 3 without external heating or light-irradiation elements. In this work, the organic conducting conjugated polymer PEDOT:PSS was combined with inorganic nitrogen-doped transition metal carbides and nitrides (N-MXene Ti 3 C 2 T x ) for chemiresistive NH 3 sensing at room temperature (20 o C). By means of the organic–inorganic n – p heterojunctions via the synergistic effect, the results show that the composite film sensor with the optimal mass ratio of 1:0.5 between N-MXene and PEDOT:PSS components delivered favorable NH 3 sensing performance than individual N-MXene or PEDOT:PSS counterparts in terms of higher response and quicker response/recovery speeds under 20 o C@36%RH air. Besides, decent repeatability, stability and selectivity were demonstrated. The incorporated N atoms served as excellent electron donors to promote the electron-transfer reactions and augment the sorption sites. Simultaneously, partial oxidation of MXene brought about some TiO 2 nanoparticles which acted as spacers to widen the interlayer spacing and probably suppress the MXene restacking during the film deposition, thus favoring the gas diffusion/penetration within the sensing layer and then a quick reaction kinetic. The modulation of consequent build-in field within the heterojunctions was responsible for the reversible NH 3 sensing. In addition, pre-adsorbed water molecules facilitated to establish a swift adsorption/desorption balance. The proposed strategy expanded the application range of MXene based composite materials and enrich the current sensing mechanisms of NH 3 gas sensors.

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Highly selective NH3 gas sensor based on polypyrrole/Ti3C2Tx nanocomposites operating at room temperature

Ultrasensitive room-temperature flexible ammonia gas sensor based on Au-functionalized polypyrrole wrapped enriched edge sulfur vacancies MoS 2 nanosheets

Pt/MoS2/Polyaniline Nanocomposite as a Highly Effective Room Temperature Flexible Gas Sensor for Ammonia Detection

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor

Ultra-dense SnO2 QDs-decorated MXene nanosheets with high water dispersibility for rapid NH3 sensing at room temperature

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Molecular ammonia sensing of PEDOT:PSS/nitrogen doped MXene Ti 3 C 2 T x composite film at room temperature

MXene Ti 3 C 2 T x -Derived Nitrogen-Functionalized Heterophase TiO 2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing

Au/α-Fe 2 O 3 /Ti 3 C 2 T x MXene Nanosheet Heterojunctions for High-Performance NH 3 Gas Detection at Room Temperature

PEDOT/flower-like 1 T-2H MoS2/nitrogen-doped graphene ternary nanocomposite for efficient room temperature real-time monitoring of ammonia

Imparting hydrophobicity to a MOF on layered MXene for the selective, rapid, and ppb level humidity-independent detection of NH3 at room temperature

Fabrication and Ammonia Gas Sensing of Palladium/polypyrrole Nanocomposite

Zr3C2O2 MXene as promising candidate for NH3 sensor with high sensitivity and selectivity at room temperature

Low Cost, Flexible, Room Temperature Gas Sensor: Polypyrrole-Modified Laser-Induced Graphene for Ammonia Detection

Nitrogen-doped carbon nano-onions/polypyrrole nanocomposite based low-cost flexible sensor for room temperature ammonia detection

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

Partially oxidized Ti3C2Tx MXene-sensitive material-based ammonia gas sensor with high-sensing performances for room temperature application

Facile Fabrication of Oxygen‐Enriched MXene‐Based Sensor and Their Ammonia Gas‐Sensing Enhancement