Abstract:Ammonia is harmful to human health, however, the detection limit of the sensor based on traditional semiconductor gas sensors is high and the speed is slow. Constructing heterostructure is an effective method to improve the performance of sensors. In this article, 1-D MoO3 nanorods and SnO2 nanoparticles are successfully combined to obtain MoO3/SnO2 nanocomposite. The 1-D structure can increase the speed of electron transport, while the nanoparticles on the surface increase the specific surface area, more importantly, the structure maximizes the interface area between the two materials which can transfer electronic more efficiently. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH) are used to analyze the microstructure and elemental composition of MoO3/SnO2. The diameter of MoO3/SnO2 nanocomposite is approximately 200 nm and the distribution is uniform. The response of MoO3/SnO2 nanocomposite to 100-ppm NH3 is 12.7 at 280 °C, and the response/recovery time is 13/2 s. The detection limit for NH3 can reach 10 ppb (response 1.3), which enables rapid detection of NH3 at low concentration. Electron transport requires more energy to overcome the contact barrier between pure SnO2 nanoparticles, which can also lead to electron emission and noise increase. However, the sensitive electrons of MoO3/SnO2 nanocomposite can transmit electrons along the 1-D rod-like structure of MoO3, which undoubtedly accelerates the efficiency of electron transmission. Moreover, n-n heterojunction formed between MoO3 and SnO2 to bend the SnO2 band and show better sensitivity to NH3. Therefore, MoO3/SnO2 nanocomposite shows a low detection limit and a rapid response/recovery speed. Nevertheless, the nanoparticles on the surface of MoO3/SnO2 nanocomposite begin to agglomerate with the increase of SnO2 content, which leads to the decrease of gas-sensitive response. The formation process of MoO3/SnO2 composites is also discussed in this article. The excellent gas sensing results show that MoO3/SnO2 composites are a promising gas sensing material.

2D/2D Dy 2 O 3 Nanosheet/MoO 3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection

Molybdenum Trioxide (Α-Moo3) Nanoribbons for Ultrasensitive Ammonia (NH3) Gas Detection: Integrated Experimental and Density Functional Theory Simulation Studies.

Imparting hydrophobicity to a MOF on layered MXene for the selective, rapid, and ppb level humidity-independent detection of NH3 at room temperature

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

Porous SnO2 nanosheets for room temperature ammonia sensing in extreme humidity

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Mesoporous WS 2 /MoO 3 Hybrids for High-Performance Trace Ammonia Detection

Suspended SnS2 Layers by Light Assistance for Ultrasensitive Ammonia Detection at Room Temperature

Mo 2 C/MoO 3 @rGO Ternary Nanocomposites as High-Performance Gas Sensor for Trace NH 3 Detection at Room Temperature

Oxygen Vacancy Mediated-Bismuth Molybdate/Graphitic Carbon Nitride Type II Heterojunction Chemiresistor for Efficient NH 3 Detection at Room Temperature

MoO 3 /SnO 2 Nanocomposite-Based Gas Sensor for Rapid Detection of Ammonia

MoS2-Templated Porous Hollow MoO3 Microspheres for Highly Selective Ammonia Sensing Via a Lewis Acid-Base Interaction

Preparation of MoS2 Nanospheres using a Hydrothermal Method and Their Application as Ammonia Gas Sensors Based on Delay Line Surface Acoustic Wave Devices

3D substoichiometric MoO3−x/EGaln framework for room temperature NH3 gas sensing

High-performance Ammonia Sensor at Room Temperature Based on 2D Conductive MOF Cu3(HITP)2

Pt/MoS2/Polyaniline Nanocomposite as a Highly Effective Room Temperature Flexible Gas Sensor for Ammonia Detection

Highly sensitive prismatic h-MoO3 sheets for temperature-dependent chemiresistive ammonia sensor

Porous MoO 3 nanosheets for conductometric gas sensors to detect diisopropylamine

Ultra-dense SnO2 QDs-decorated MXene nanosheets with high water dispersibility for rapid NH3 sensing at room temperature

Porous and Homogeneous Nanoheterojunction-Accumulating PdO@ZnO Structure for Exhaled Breath Ammonia Sensing