Abstract:Highly conductive domain walls in insulating ferroelectric LiNbO3 (LNO) single-crystal thin films with atomic smoothness are attractive for use in high-density integration of the ferroelectric domain wall random access memory (DWRAM) because of their excellent reliability and high read currents. However, downscaling of the memory size to the nanoscale could cause poor polarization retention. Understanding the size-dependent electrical performance of a memory cell is therefore crucial. In this work, highly insulating X-cut LNO thin films were bonded to SiO2/Si wafers and lateral mesa-like cells were fabricated on the film surfaces, where contact occurred with two-sided electrodes along the polar z-axis. Under application of an in-plane electric field above a coercive field (Ec), the domain within each memory cell was switched to be antiparallel to the unswitched referencing domain at the bottom; this resulted in the formation of a conducting domain wall, which enables the nondestructive readout strategy of the DWRAM. The cell, which has a lateral length (l) above a critical size (l0) of 105 nm, is found to be a mixture of two phases across the cell area. The inner area of the cell suffers from poor polarization retention because Ec = 150 kV/cm, as demonstrated by in-plane piezoresponse force microscopy imaging. In comparison, the outer periphery domains, which have lengths of 70 nm (∼l0/2), show good retention but require a much higher Ec of 785 kV/cm. The relevant physics is discussed as phase reconstruction occurs after release of the in-plane compressive strain near the outer regions; the results show good agreement with those of one-dimensional thermodynamic calculations and phase-field simulations. The measured current–voltage curves demonstrated a sudden enhancement of the wall current across the cell when l < l0, thus implying higher readout wall currents and better retention for the DWRAM at higher storage densities.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22969?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22969</a>.Phase-field simulation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22969/suppl_file/am0c22969_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Operation of Lithium Niobate Ferroelectric Domain Wall Memory at 673 K

High temperature ferroelectric domain wall memory

Cryogenic Ferroelectric LiNbO3 Domain Wall Memory

In-Plane Ferroelectric Domain Wall Memory with Embedded Electrodes on LiNbO3 Thin Films.

High-Performance LiNbO3 Domain Wall Memory Devices with Enhanced Selectivity via Optimized Metal–Semiconductor Contact

Oxygen vacancy-mediated enhancement of ferroelectric domain wall memory performance at elevated temperatures

Low-voltage Operation of High-Density Ferroelectric Domain Wall Memory

Sub 20 Nm‐node LiNbO3 Domain‐Wall Memory

Sub 20 nm‐Node LiNbO 3 Domain‐Wall Memory

Hybrid Dry and Wet Etching of LiNbO3 Domain-Wall Memory Devices with 90° Etching Angles and Excellent Electrical Properties.

Epitaxial Integration of Tetragonal Bifeo3 with Silicon for Nonvolatile Memory Applications

Size-Controlled Polarization Retention and Wall Current in Lithium Niobate Single-Crystal Memories

Adjustable onset voltages of embedded LiNbO3 domain-wall selectors for large-scale memory integration

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf0.5Zr0.5O2 Ferroelectric Memory Arrays

Fast Operations of Nonvolatile Ferroelectric Domain Wall Memory with Inhibited Space Charge Injection

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf$_{\text{0}.\text{5}}$Zr$_{\text{0}.\text{5}}$O$_{\text{2}}$ Ferroelectric Memory Arrays

Al0.68Sc0.32N/SiC based metal-ferroelectric-semiconductor capacitors operating up to 900 C

A van der Waals Ferroelectric Tunnel Junction for Ultrahigh‐Temperature Operation Memory

Energy-Efficient Ferroelectric Domain Wall Memory with Controlled Domain Switching Dynamics

Nonvolatile Electrochemical Memory at 600C Enabled by Composition Phase Separation

Scalable and Stable Ferroelectric Non-Volatile Memory at > 500 $^\circ$C