Abstract:The typical high -density zirconium carbide (ZrC) ceramic requires high temperature and high pressure, leading to high manufacturing cost for complex shapes. Herein, nano -sized carbon layer encapsulated ZrC particles were pressureless sintered to achieve near -net preparation of high -density and complex -shape ZrC ceramic. The results indicate that reaction between carbon layer and the ZrC x O y phase in ZrC was improved because the carbon layer shortened the oxygen diffusion pathway. The oxygen content decreased from 3.52 wt% to 0.82 wt% while the thickness of carbon layer decreased from 4.0 nm to 0.75 nm after sintering at 1950 degrees C for 1 h. Furthermore, the migration of oxygen from ZrC x O y phase to the carbon layer effectively facilitate the formation and growth of the sintering neck. The resulting ZrC ceramic exhibited a high relative density of 92.3 % and excellent mechanical properties. The Vickers hardness, indentation fracture toughness, micro hardness, elastic modulus, and flexural strength were 17.3 +/- 0.7 GPa, 4.0 +/- 0.5 MPa m 1/2 , 22.2 +/- 2.4 GPa, 429.9 +/- 20.7 GPa, and 324 +/- 8 MPa, respectively. This work provides a novel perspective to fabricate near -net, high -density and complex -shape ZrC ceramic at lower temperature without pressure.

Ultrafast High-Temperature Sintering and Densification of ZrC-based Ceramics

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

Full Densification of Zirconium Carbide Ceramics Sintered under High Pressure at Low Temperature

Sintering Pure Polycrystalline Zirconium Carbide Ceramics with Enhanced Mechanical Properties under High-Pressure and High-Temperature

Low temperature consolidation for fine-grained zirconium carbide from nanoparticles with ZrH2 as sintering additive

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Preparation and properties of zirconium diboride-based ultra-high temperature ceramics

In-situ reaction syntheis and mechanical properties of ultra high temperture ceramics

Ultrafast high-temperature sintering (UHS) of WC and WC-containing ZrB 2

Effect of sintering temperature on densification of ultra-high temperature ceramic ZrB2-SiC

Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis

Microstructure and mechanical properties of ZrB2-based UHTC via reactive hot pressing

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics

Pressureless Sintering Behavior of ZrC Ceramic Particles Encapsulated by Nano-Sized Carbon Layer

Low temperature sintering of ZrC-SiC composite

Enhancing densification rate and the unusual 4H-SiC polytype stabilization in ultrafast high-temperature sintering of α-SiC

Ultra‐fast high temperature sintering of ZrB2

Ultrafast Pressure Sintering of B4C-based Composites Via Direct Joule Heating

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Densification, Mechanical and Thermal Properties of ZrC1− Ceramics Fabricated by Two-Step Reactive Hot Pressing of ZrC and ZrH2 Powders