Abstract:While the use of low-melting-point metals as sintering aids for high-entropy carbide (HEC) ceramics has been well established, their existence can compromise hardness due to residual metallic inclusions. This study demonstrates an innovative strategy to meet this challenge, where (Ti,Zr,Nb,Ta,Mo)C high-entropy carbide ceramics with ultrafine grains and enhanced hardness are obtained through chromium (Cr)-metal-assisted spark plasma sintering (SPS) at a temperature as low as 1600 degrees C. The results show that the addition of 5 vol% Cr promotes the formation of highly densified single HEC phase ceramics with a high relative density (98.4%) and an ultrafine-grained microstructure (0.17 mu m). This low-temperature densification mechanism can be attributed to Cr's solid-solution effect within the matrix and the increased carbon vacancies generated during sintering. The grain size of the (Ti,Zr,Nb,Ta,Mo)C ceramics with 5 vol% Cr metal addition is significantly smaller than that of Cr-free (Ti,Zr,Nb,Ta,Mo)C ceramics sintered at 2000 degrees C (3.03 mu m) or via traditional low-temperature liquid-phase sintering (1.3-1.5 mu m). Importantly, the addition of 5 vol% Cr substantially increased the hardness of the ceramics, with a remarkable increase from 23.57 to 28.16 GPa compared to that of the pure (Ti,Zr,Nb,Ta,Mo)C ceramics, owing to the fine-grain strengthening and solid-solution strengthening mechanisms. This work highlights the uniqueness of Cr metal as a sintering aid in achieving densification and hardness improvements in (Ti,Zr,Nb,Ta,Mo)C ceramics, offering a promising strategy for improving the properties of HEC materials for further development in the near future.

Low temperature consolidation for fine-grained zirconium carbide from nanoparticles with ZrH2 as sintering additive

Influence of bismuth oxide as a sintering aid on the densification of cold sintering of zirconia

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Cr-assisted Low-Temperature Densification of (ti,zr,nb,ta,mo)c High-Entropy Carbides with Ultrafine Grain and Enhanced Hardness

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Reactive sintering behavior and enhanced densification of (Ti,Zr)B2–(Zr,Ti)C composites

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Synthesis and formation mechanism of ZrC–SiC–TiC ceramic powders with high-sinterability via sol-gel process and carbothermal reduction

Carbothermal Reduction Synthesis of Nanocrystalline Zirconium Carbide and Hafnium Carbide Powders Using Solution-Derived Precursors

Addition Effect of ZrC Nano-powder on the Microstructure and Mechanical Properties of TiCN-based Cermets Prepared by Spark Plasma Sintering

Spark plasma sintered WC-Ni cemented carbides with various contents of ZrC nano-powder

A New Sintering Approach to Ceramics at Low Temperature from Ba(Zr X Ti 1- X )O 3 Nanoparticles Doped by ZnO

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Synthesis and Pyrolysis Evolution of Glucose-Derived Hydrothermal Precursor for Nanosized Zirconium Carbide

Preparation and Characterization of ZrB 2 -Sic Ultra-High Temperature Ceramics by Microwave Sintering

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

Phase Composition and Microstructure of Binderless Wc-Zrc Cemented Carbides Fabricated by Spark Plasma Sintering

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering