Abstract:Ultrafast High-temperature Sintering (UHS) is a novel sintering process enabling extremely high heating rates by direct contact of sample to electrically heated thin carbon strips. Using strontium titanate as a model system, the densification behavior by UHS was investigated. Controlled experiments via maximum current limitation were used to study the influence of the applied current on the degree of densification and resulting final grain size. Simulations by Finite Element Modeling (FEM) allow estimating the sample temperature reached during UHS, which is in good agreement with the experimental data. Moreover, the FEM simulations show a self-stabilization of the sample temperature by thermal radiation. UHS results suggest that rapid densification can be achieved with an extremely high heating rate. The microstructure of the undoped strontium titanate samples shows exaggerated grain growth and pore-boundary separation, which results in pore entrapment inside grains. The addition of 2 mol% iron in strontium titanate is beneficial by limiting the grain growth during the UHS sintering cycle. Uniform densification and grain growth in the sample is consequently observed. Scanning transmission electron microscopy/energy dispersive x-ray spectroscopy (STEM/EDS) is utilized to analyze grain boundary segregation. Measurement of the electrical conductivity of the UHS sintered samples by impedance spectroscopy suggest that rapid densification by UHS enables full access to the functional properties of strontium titanate as compared to the conventionally sintered material.

Ultra‐fast high temperature sintering of ZrB2

Ultrafast high-temperature sintering (UHS) of WC and WC-containing ZrB 2

Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis

Ultra-fast high-temperature sintering of strontium titanate

Ultrafast high-temperature sintering (UHS) vs. conventional sintering of 3YSZ: Microstructure and properties

Ultrafast high-temperature sintering of bulk oxides

Carbon free ultra-fast high temperature sintering of translucent zirconia

Enhancing densification rate and the unusual 4H-SiC polytype stabilization in ultrafast high-temperature sintering of α-SiC

Microstructure and mechanical properties of ZrB2-based UHTC via reactive hot pressing

Ultrafast high-temperature sintering of silicon nitride: A comparison with the state-of-the-art techniques

Ultra-fine Zirconium Diboride Powders Prepared by a Combined Sol–gel and Spark Plasma Sintering Technique

Ultrafast high-temperature sintering of gadolinia-doped ceria

Ultrafast high-temperature sintering of aluminum nitride

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

Microstructure Evolution and Densification Behavior of Ultrafast High-Temperature Sintered Li6.5La3Zr1.5Ta0.5O12 Ceramics

Ultra-fast high-temperature sintering of transparent MgAl2O4

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

In-situ reaction syntheis and mechanical properties of ultra high temperture ceramics

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics