Abstract:Ultrafast High-temperature Sintering (UHS) is a novel sintering process enabling extremely high heating rates by direct contact of sample to electrically heated thin carbon strips. Using strontium titanate as a model system, the densification behavior by UHS was investigated. Controlled experiments via maximum current limitation were used to study the influence of the applied current on the degree of densification and resulting final grain size. Simulations by Finite Element Modeling (FEM) allow estimating the sample temperature reached during UHS, which is in good agreement with the experimental data. Moreover, the FEM simulations show a self-stabilization of the sample temperature by thermal radiation. UHS results suggest that rapid densification can be achieved with an extremely high heating rate. The microstructure of the undoped strontium titanate samples shows exaggerated grain growth and pore-boundary separation, which results in pore entrapment inside grains. The addition of 2 mol% iron in strontium titanate is beneficial by limiting the grain growth during the UHS sintering cycle. Uniform densification and grain growth in the sample is consequently observed. Scanning transmission electron microscopy/energy dispersive x-ray spectroscopy (STEM/EDS) is utilized to analyze grain boundary segregation. Measurement of the electrical conductivity of the UHS sintered samples by impedance spectroscopy suggest that rapid densification by UHS enables full access to the functional properties of strontium titanate as compared to the conventionally sintered material.

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

Ultrafast high-temperature sintering of bulk oxides

Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering

Ultrafast high-temperature sintering of gadolinia-doped ceria

Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering

Enhancing densification rate and the unusual 4H-SiC polytype stabilization in ultrafast high-temperature sintering of α-SiC

Ultra-fast high-temperature sintering of strontium titanate

Ultra-fast high temperature sintering (UHS) of Li1.5Al0.5Ge1.5P3O12 electrolyte: A rationalization of the heating schedule

Ultra-fast high-temperature sintering (UHS) of Ce0.2Zr0.2Y0.2Gd0.2La0.2O2−δ fluorite-structured entropy-stabilized oxide (F-ESO)

Ultrafast high-temperature sintering of dense and textured alumina

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Effect of CaO doping on densification and micr‐ostructure control of highly transparent La0.4Gd1.6Zr2O7 ceramics

Ultrafast high-temperature sintering of Li7La3Zr1.75Nb0.25Al0.15O12 (LLZO)

Ultrafast high-temperature sintering of silicon nitride: A comparison with the state-of-the-art techniques

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Upscaling Ultrafast High-Temperature Sintering (UHS) to consolidate large-sized and complex-shaped ceramics

Combustion synthesis and spark plasma sintering processing of (1‐x)Ba(Zr0.2Ti0.8)O3‐x(Ba0.7Ca0.3)TiO3 ceramics

Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes

Ultra-fast high-temperature sintering of transparent MgAl2O4