Abstract:La2Ce2O7 (LC), La2Zr2O7 (LZ), and yttria stabilized zirconia (YSZ) nanostructured powders with different agglomerate structures were successfully synthesized via wet-chemical method, and their high-temperature sintering resistance was systematically studied in this paper. Experimental results indicate that the synthesized nanostructured YSZ sample possessed the highest sintering resistance while nanostructured LC sample had the lowest sintering resistance. Theory of sintering process at initial stage was used to analyze experimental results. Sintering abilities of materials were closely related to their surface energy, lattice and grain boundary diffusion coefficients, and powder morphologies. Moreover, intrinsic sintering resistance (ISR) and extrinsic sintering resistance (ESR) were defined to further clarify the experimental results. ISR is determined by surface energy, lattice and grain boundary diffusion coefficients of the material, while ESR is affected by dimensions and density of raw powders. The highest sintering resistance of YSZ originated from dense initial powder with large size, which led to extraordinary ESR of the sample. ISR of LZ was found to be much better than that of YSZ and LC, while ISR values of LC and YSZ were similar. Finally, as ISR ability of thermal barrier coating (TBC) materials can be clarified by studying the corresponding crystalline size evolution, a feasible approach was proposed to compare ISR ability of novel TBC materials.

Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

The effect of microstructure on the doped lanthanum zirconates transport properties

Effect of the rare earth oxides on sintering behavior and microstructure of ZrB2-SiC ceramics

Effect of CaO doping on densification and micr‐ostructure control of highly transparent La0.4Gd1.6Zr2O7 ceramics

Formation of single-phase multicomponent zirconate with colossal atomic radius difference via reactive flash sintering

Effect of Rare Earth Elements on Stability and Sintering Resistance of Tetragonal Zirconia for Advanced Thermal Barrier Coatings

Structural evolution, synthesis mechanism and thermal conductivity of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy ceramic prepared by concurrent chemical coprecipitation method

Sintering resistance of La2Ce2O7, La2Zr2O7, and yttria stabilized zirconia ceramics

Effect of YSZ Composite Ceramics with Different LaF3 Doping Content on Microstructure Evolution and Infrared Emissivity

Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering

Effect of doping rare earth oxides (RE= Sc, Y, Gd, Eu) on structural, thermal and mechanical properties of La2(Zr0.7Ce0.3)2O7 ceramics

Microstructure Evolution and Densification Behavior of Ultrafast High-Temperature Sintered Li6.5La3Zr1.5Ta0.5O12 Ceramics

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

Rattler Effect on the Properties of Multicomponent Rare-Earth-zirconate Ceramics

Ultrafast high-temperature sintering of bulk oxides

Thermophysical and mechanical properties of dual-phase medium- and high-entropy rare-earth zirconate ceramics

Single-phase Rare-Earth High-Entropy Zirconates with Superior Thermal and Mechanical Properties

Effect Of Sintering Temperature On Structures And Properties Of High Quality Zirconia Ceramics Under Oscillatory Pressure

Investigations on the mechanical and thermal properties of multicomponent dual-phase rare-earth zirconate ceramics