Abstract:In light ice-covered areas, icing of composite insulators with different pollution degree has great influence on their insulation performance. In this paper, the solid layer pollution method was adopted to realize different degrees of pre-pollution for six kinds of FXBW-220/160 composite insulators. Then, with the reference ice thickness of 10 mm as the standard, icing and AC flashover tests were carried out on insulators under the multi-functional artificial climate chamber. The ice weight and minimum flashover voltage ( Umf )of insulators under different pollution degrees were obtained, and the path of flashover arc was recorded. In addition, the maximum withstand voltage gradient equation of insulators under different discharge probabilities was established. The results show that when insulators are energized icing, the ice weight decreased with the increase of salt deposit density (SDD), which in turn causes the Umf to decrease. The relationship between the Umf and SDD is negative power function regardless of whether the insulators are energized icing or not. The differences in arc path, residual ice layer resistance, and the ratio of air gap arc to ice surface arc are the main reason for affecting the flashover voltage. In addition, the maximum withstand voltage gradient E α at discharge probability α% of 10%, 5%, and 0.13% when the insulators are energized icing decreases with the increase of SDD, and E 10 > E 5 > E 0.13 . Increasing the spacing and diameter of the largest shed of composite insulators and reasonably cooperating with medium/small sheds can help to significantly improve their flashover performance. The results of this paper can provide data support for the selection and optimal design of insulators for 220 kV transmission lines in light ice-covered areas.

AC Icing Flashover Characteristics and Maximum Withstand Voltage Gradient of 220kv Polluted Composite Insulators

The optimization of 750kV anti-ice-flashing composite insulator string

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

Icing Flashover Characteristics of 500 Kv AC Post Insulators

AC Flashover Characteristics of Ice-Covered Suspension Insulators

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Flashover performance of UHV&EHV post insulators under icing conditions

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Pollution Flashover Characteristics of Composite Crossarm Insulator with a Large Diameter

Pollution Flashover Performance of Full-Scale ±800 Kv Converter Station Post Insulators at High Altitude Area

Research on pollution flashover characteristics of large-size composite outdoor insulation for UHV DC in high altitude area

Icing Flashover Performance of HVDC Transmission Lines

DC pollution flashover and rain flashover performance for composite post insulators at high altitudes

Pollution Flashover Characteristics of the Insulators Of±800 Kv HVDC Lines under High Altitude Areas

DC Flashover Performance of Ice-Covered Composite Insulators with Parallel Air Gaps

Flashover of Composite Insulators Without Hydrophobicity under Heavy Ice and the Secondary Contamination Conditions

AC Electric Characteristics of the Ice-covered 110 Kv Glass Insulator Strings

Flashover Performance of HVDC Iced Insulator Strings