Abstract:Ice accretion on the insulators can reduces the creepage distance to a certain extent as low as the dry arc distance, which may cause flashover trip and subsequent blackout. Extensive research on insulator icing has been carried out in a controlled-climate room. Due to great differences in environmental parameters between laboratory simulation and field tests, icing characteristics and discharge development of ice-covered insulator obtained in the laboratory cannot veritably reflect natural icing law and arc propagation process. Consequently, in the present study the glaze-icing on energized insulators was investigated on site, and the mechanism of icicle growth on the insulator energized with different voltage levels was revealed. Meanwhile, AC flashover performances and arc discharge development of ice-coated insulators for the two test conditions were compared and discussed. Results show that for a weak electric field, icicle firstly grows vertically, and then bends to the axis of the insulator when its length reaches to a certain level. Nevertheless, icicle develops towards the axis at the beginning under a high electric field. AC flashover voltage of ice-accreted insulators increases exponentially with an increasing applied voltage, while the relation of flashover voltage and ice weight fits well with a negative power function. Icing flashover voltage of the insulators obtained in natural environment is 14%~21% higher than that in the chamber. Compared with the flashover in the laboratory, during the discharge of the insulators naturally covered with ice, arc extinction-reignition and floating phenomena are more significant, and the icemelting is more severe.

AC Electric Characteristics of the Ice-covered 110 Kv Glass Insulator Strings

AC Flashover Voltage and Arc Development of Long Insulators Strings in Natural Icing Environment

Study on AC Flashover Process of Iced 110 kV Insulator Strings

AC Flashover Performance and Discharge Process of Iced Insulator Strings

Flashover Performance of HVDC Iced Insulator Strings

Flashover Performance of Ice-covered LXY4-160 Insulator Strings Under Switching Impulse

AC Flashover Characteristics and Arc Development Process of Glaze Ice-Covered Insulators in Natural Environment

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

AC Flashover Performance and Mechanism of Polluted and Iced IEC Standard Suspension Insulator String

Study on AC Flashover Performance and Discharge Process of Polluted and Iced IEC Standard Suspension Insulator String

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Experimental Study on the Flashover Characteristics of 500 Kv AC Ice-covered Insulator String under Different Arrangement

AC Flashover Performance of Glass Insulators Covered with Ice or Snow at Natural Station

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Study of the effect of ice adhesion on electrical power transmission insulator

Influence of Insulator String Positioning on AC Icing Flashover Performance

Ac Flashover Performance and Voltage of Long Polluted and Iced Xp-70 Suspension Insulator String

Study on Icing Performance of 110kv Insulator Strings at AC Service Voltage

Analysis of the Flashover Process on Ice-covered Insulator String

Flashover performance of UHV&EHV post insulators under icing conditions

Effect of electrical test methods on dc flashover performance of ice-covered ceramic insulators