Abstract:Purpose The paper aims to clarify the distribution of excess pore pressure during cone penetration in two-layered clay and its influence on penetrometer resistance. Design/methodology/approach An arbitrary Lagrangian–Eulerian scheme is adopted to preserve the quality of mesh throughout the numerical simulation. Simplified methods of layered penetration and coupled pore pressure analysis of cone penetration have been proposed and verified by previous studies. The investigation is then extended by the present work to study the cone penetration test in a two-layered clay profile assumed to be homogeneous with the modified Cam clay model. Findings The reduction of the range of pore pressure with decreasing PF will cause a decrease of the sensing distance. The PF of the underlying soil is one of the factors that determine the development distance. The interface can be obtained by taking the position of the maximum curvature of the penetrometer resistance curve in the case of stiff clay overlying soft clay. In the case of soft clay overlying stiff clay, the interface locates at the maximum curvature of the penetrometer resistance curve above about 1.6D. Research limitations/implications The cone penetration analyses in this paper are conducted assuming smooth soil-cone contact. Originality/value A simplified method based on ALE in Abaqus/Explicit is proposed for layered penetration, which solves the problem of mesh distortion at the interface between two materials. The stiffness equivalent method is also proposed to couple pore pressure during cone penetration, which achieves efficient coupling of pore water pressure in large deformations.

Estimation of Effective Internal Friction Angle by Ball Penetration Test: Large-Deformation Analyses

Large-Deformation Analyses

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

A Friction Evaluation Method Based on Barrel Compression Test

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

An improved evaluation method for the undrained shear strength of uniform soft clay in the nonfull flow state based on ball penetration simulations

Assessing the Bearing Capacity of Backfills by Stress Wave Velocity and Cone Penetration Resistance

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

Friction anlysis of large diameter steel cylinder penetration process using 3D-DEM

Influence of Penetration Rate on Measured Resistance with Full Flow Penetrometers in Soft Clay

Interpreting strength parameters in soft clays from a new free-fall penetrometer

Investigation of Penetration Process of Three Full-flow Penetrometers in Marine Soft Clay

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Numerical investigations into cycling of full-flow penetrometers in soft clay

Numerical study of piezoball dissipation test with penetration under partially drained conditions

Numerical modeling of free-falling spherical penetrometer–clay–water interactions

Coupled pore pressure analysis of cone penetration test in two-layered clay

Interpretation of Piezocone Penetration Tests in Centrifuge