Abstract:The piezocone (CPTu) dissipation test is used to characterize how the applied load from the penetrating cone is distributed between the soil and pore fluid during both penetrometer advancement and when penetration is paused. The coefficient of consolidation is often estimated from CPTu dissipation tests by interpreting the rate of excess porewater pressure ( ∆u ) decay to static conditions during a pause in cone penetration. Most CPTu dissipation test interpretation methods are based on Terzaghi consolidation theory for ∆u dissipation at the cone shoulder ( u2 position) or cone face ( u1 position) and assume that radial ∆u dissipation dominates the response. However, several recent studies show that vertical ∆u migration does contribute to the response. This study uses a large deformation direct axisymmetric cone penetration model to characterize the soil-water mechanical response during CPTu dissipation tests, and in particular, the role of vertical ∆u dissipation on the response at the u1 and u2 positions. Large deformations around the penetrating cone are accommodated with an Arbitrary Lagrangian Eulerian approach. Soil behavior is modeled with the MIT-S1 constitutive model calibrated for Boston blue clay (BBC) soil behavior. ∆u dissipation following undrained cone penetration is simulated with coupled consolidation for BBC with over-consolidation ratios (OCR) of 1, 2, and 4 and a range of hydraulic conductivity anisotropy. The simulated u1 and u2 dissipation responses are presented to study how they are affected by OCR and hydraulic conductivity anisotropy. A correction factor is recommended to account for hydraulic conductivity anisotropy when interpreting the horizontal coefficient of consolidation from CPTu dissipation tests.

Influence of Penetration Rate on Measured Resistance with Full Flow Penetrometers in Soft Clay

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Numerical investigations into cycling of full-flow penetrometers in soft clay

Investigation of Penetration Process of Three Full-flow Penetrometers in Marine Soft Clay

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Assessing the Bearing Capacity of Backfills by Stress Wave Velocity and Cone Penetration Resistance

Strength Measurement for Near-Seabed Surface Soft Soil Using Manually Operated Miniature Full-Flow Penetrometer

The Strength Assessment for T-bar Penetrometer Tests at Shallow Embedment in Clay considering Strain Softening

An improved evaluation method for the undrained shear strength of uniform soft clay in the nonfull flow state based on ball penetration simulations

Large-Deformation Analyses

Investigation of piezocone dissipation test interpretation in clay accounting for vertical and horizontal porewater pressure dissipation with a large deformation axisymmetric penetration model

T-Bar to Spudcan Design Approach in Single-Layer Clays and Calcareous Silts

Experimental and Numerical Study of Rate Effect in Cone Penetration Tests

A novel T-bar test method ensuring full-flow mechanism in stiffer clay

Coupled analysis of full flow penetration problems in soft sensitive clays