Abstract:The soft clay with low strength is widely distributed in the offshore area of China, the evaluation of its engineering properties will directly affect the design and safe operation of wind turbine foundation. Piezocone penetration test is the most widely used in-situ test method in offshore geotechnical investigation, which has less disturbance on soil. The disadvantage is that soil parameters can only be obtained through interpretation, which are site specific. Based on an offshore wind power project in Jiaxing offshore area of Hangzhou Bay, Zhejiang province, this paper carried out laboratory tests, in-situ piezocone penetration test. The range of calibrated CPTU cone factor N-kt for muddy silty clay in Hangzhou Bay offshore area is from 14.15 to 30.18, with a total average value of 20.25. The calibration results show that the cone factor N-kt is negatively correlated with pore pressure ratio B-q, but positively correlated with water content w, void ratioe, liquid limit w(L), plastic limit w(p) and plasticity indexI(p). And a multiple regression formula between N-kt and pore pressure ratio B-q, plasticity index I-p are obtained. By applying the N-kt correlations into the wind farm at Pinghu offshore area near this project, the results show that the correlations between water content w, void ratio e and cone factor N-kt and multiple regression formula between N-kt and pore pressure ratio B-q, plasticity index Ip have better interpretion quality on the strength of soft clay in Hangzhou Bay offshore area. The established correlations are not only suitable for the muddy silty clay, but also for the muddy clay and silty clay, which have good site applicability.

Investigation of Penetration Process of Three Full-flow Penetrometers in Marine Soft Clay

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Experimental Study on Combined Determination of Osmosis and Consolidation for Marine Soft Soil

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Influence of Penetration Rate on Measured Resistance with Full Flow Penetrometers in Soft Clay

Numerical investigations into cycling of full-flow penetrometers in soft clay

The Strength Assessment for T-bar Penetrometer Tests at Shallow Embedment in Clay considering Strain Softening

Estimation of Undrained Shear Strength in Rate-Dependent and Strain-Softening Surficial Marine Clay Using Ball Penetrometer

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

Evaluation of Undrained Shear Strength of Surficial Marine Clays Using Ball Penetration-Based CFD Modelling

An improved evaluation method for the undrained shear strength of uniform soft clay in the nonfull flow state based on ball penetration simulations

Behaviour of ball penetrometer in uniform single- and double-layer clays

A Fluid Mechanics Approach to Evaluating Marine Soft Clay Strength by a Ball Full-Flow Penetrometer

Undrained Shear Strength Measurement For Deep-Sea Surficial Sediments In The West Of South China Sea Using Miniature Full-Flow Penetrometer

Experimental Study on the Undrained Shear Strength of Deep-Sea Soft Soil Using Improved T-bar Penetrometer

REVIEW ON PENETRATION MECHANISM AND APPLICATION OF BALL PENETROMETER IN OFFSHORE ENGINEERING

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

Centrifuge experiment on the penetration test for evaluating undrained strength of deep-sea surface soils