Abstract:<p>Full-flow penetrometers (ball and T-bar) are widely used for measurements of strength characteristics of clayey soils in offshore field investigations and laboratory tests. However, the accuracy of the estimated undrained shear strength is hampered by: (1) the drastic variation of the bearing factor for the penetrometer at shallow and transitional penetration depths where full-flow mechanisms are not achieved; and (2) the strain-softening of the soil, which results in a degradation of the estimated strength. This study conducted LDFE analyses to simulate the entire penetration process of full-flow penetrometers in strain-softening soils from shallow to deep embedment depths. Parametric studies were performed to investigate the effects of varied factors on the bearing factor and failure mechanism during the penetrometer penetration. Based on the LDFE analyses, empirical formulas are established to represent the critical penetration depths in the strain-softening soil, which are used to correct the bearing factor at shallow penetration depths. The discrepancies of the transitional failure mechanism and the trapped cavity bearing factor between ball and T-bar are emphasized. Finally, a back-analyses framework is proposed to estimate the strength parameters (including the original undrained shear strength prior to any strain-softening, and the strain-softening parameters) based on the measurements of the penetrometer during the first penetration from shallow to deep embedment depths. Through a series of model tests, the reliability of the back-analyses framework is validated.</p>

T-Bar to Spudcan Design Approach in Single-Layer Clays and Calcareous Silts

T-Bar to Spudcan Design Approach in Single-Layer Clays and Calcareous Silts

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Interpretation of T-bar penetrometer tests at shallow embedment and in very soft soils

A novel T-bar test method ensuring full-flow mechanism in stiffer clay

The Strength Assessment for T-bar Penetrometer Tests at Shallow Embedment in Clay considering Strain Softening

Field Data and Design Methods for Spudcan Squeezing in Weak-Over-Strong Soil Stratigraphy

Interpreting T-bar tests in ultra-soft clay

Modelling the degradation of penetration resistance during cyclic T-bar tests in a Gulf of Mexico clay

Influence of Penetration Rate on Measured Resistance with Full Flow Penetrometers in Soft Clay

Soil Deformation and Erosion Near Mooring Chains in Clay Based on Cyclic T-Bar Tests

Assessment of Seabed Trench Formation Based on Marine Sediment Properties and Chain-Bar Penetration Tests

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Strength Measurement for Near-Seabed Surface Soft Soil Using Manually Operated Miniature Full-Flow Penetrometer

Improved Prediction of Peak Resistance for Spudcan Penetration in Sand Layer Overlying Clay

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Estimation of spudcan penetration in variable sand deposits with the Arbitrary Lagrangian Eulerian Finite Element Method

Interpretation of Interbedded Thin–Soft Layer Properties from T-Bar Penetration Tests