Abstract:The jack-up rig is the most widely applied mobile platform in the shallow-water offshore drilling. Since several predetermined target wells are in the soil stratum of sand overlying clay, the punch-through accidents occur frequently during the jack-up rig spudcan penetration leading to disastrous consequences and sometimes even casualties. Although a few centrifugal model experiments and indoor large-scale experiments have been conducted to simulate the spudcan penetration, these experiments expose significant knowledge gaps that deviate from the actual field operations due to the limitations of a constant displacement speed plan instead of multi-stage preloading plan. In this study, seventeen (17) field experiments simulating spudcan installation in sand overlying clay in in-situ soil strata in the intertidal sea of the Bohai Bay are reported to address the knowledge gaps. A systematic study of the spudcan penetration is presented through key influencing factors such as soil strength ratio of upper sand to lower clay, geometric ratio of spudcan diameter to upper sand thickness, ballasting speed and holding period time. Results indicate that the ultimate (peak) soil bearing capacity increases almost quadratically with the increase in strength ratio of upper sand to lower clay; the final spudcan penetration resistance decreases as a power law relationship with the increase in geometric ratio of spudcan diameter to upper sand thickness; the instantaneous spudcan penetration velocity increases as a logarithmic function with the increase in ballasting speed and the pore water pressure decreases as an exponential function with the increase in holding period time. From these experiments, three novel schemes are proposed to prevent the punch-through. Lastly, this study provides a design basis and theoretical guidance for precise calculations of the ultimate bearing capacity, accurate analysis of punch-through risk and effective prevention of the punch-through accidents in the real jack-up rig.

Field Data and Design Methods for Spudcan Squeezing in Weak-Over-Strong Soil Stratigraphy

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Field experimental investigation of punch-through for different operational conditions during the jack-up rig spudcan penetration in sand overlying clay

Quantifying Installation Risk During Spudcan Penetration

Model Tests on Penetration and Pullout of Suction Caissons in Silt

Experimental Study on Lateral Pile–soil Interaction of Offshore Tetrapod Piled Jacket Foundations in Sand

Causes of post-installation penetration of jack-up spudcan foundations in clays

Estimation of spudcan penetration in variable sand deposits with the Arbitrary Lagrangian Eulerian Finite Element Method

Probabilistic Site-Characterisation Using Monitored Spudcan Installation Data

Numerical modelling of sand plug formation during punch-through of a spudcan footing

Time evolution of elastic stiffness coefficients for a jack-up spudcan in clay during operation

Bayesian prediction of peak resistance of a spudcan penetrating sand-over-clay

Numerical Assessment of Jackup Spudcan Foundations by varying Angle of Spud in 3d Fem in Geotechnical Engineering

Model Tests on Installation Techniques of Suction Caissons in A Soft Clay Seabed

Seepage Induced Soil Failure and Its Mitigation During Suction Caisson Installation in Silt

Capacity of spudcan foundation on dense sand overlying clay under combined loading

A parametric study on the structural strength of a jack-up's leg in different operating locations

Probabilistic Punch-Through Distance for A Spudcan Penetrating Sand-Over-Clay

Simulation-Based Analysis Of Spudcan Interaction With Soil

Behavoir Of Installation For Suction Anchor In Soft Clay

Effects of Installation on Combined Bearing Capacity of a Spudcan Foundation in Spatially Variable Clay