Abstract:The jack-up rig is the most widely applied mobile platform in the shallow-water offshore drilling. Since several predetermined target wells are in the soil stratum of sand overlying clay, the punch-through accidents occur frequently during the jack-up rig spudcan penetration leading to disastrous consequences and sometimes even casualties. Although a few centrifugal model experiments and indoor large-scale experiments have been conducted to simulate the spudcan penetration, these experiments expose significant knowledge gaps that deviate from the actual field operations due to the limitations of a constant displacement speed plan instead of multi-stage preloading plan. In this study, seventeen (17) field experiments simulating spudcan installation in sand overlying clay in in-situ soil strata in the intertidal sea of the Bohai Bay are reported to address the knowledge gaps. A systematic study of the spudcan penetration is presented through key influencing factors such as soil strength ratio of upper sand to lower clay, geometric ratio of spudcan diameter to upper sand thickness, ballasting speed and holding period time. Results indicate that the ultimate (peak) soil bearing capacity increases almost quadratically with the increase in strength ratio of upper sand to lower clay; the final spudcan penetration resistance decreases as a power law relationship with the increase in geometric ratio of spudcan diameter to upper sand thickness; the instantaneous spudcan penetration velocity increases as a logarithmic function with the increase in ballasting speed and the pore water pressure decreases as an exponential function with the increase in holding period time. From these experiments, three novel schemes are proposed to prevent the punch-through. Lastly, this study provides a design basis and theoretical guidance for precise calculations of the ultimate bearing capacity, accurate analysis of punch-through risk and effective prevention of the punch-through accidents in the real jack-up rig.

Improved Prediction of Peak Resistance for Spudcan Penetration in Sand Layer Overlying Clay

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

A New and Openly Accessible Database of Tests on Piles Driven in Sands

Investigation of the peak punch-through capacity of spudcan on sand overlying spatially variable clay

Probabilistic prediction of spudcan peak penetration resistance based on parameter estimation and sectionalized adaptive linear simplification

Predicting the ultimate bearing capacity of spudcan in stiff-over-soft clay based on a failure model varying with soil parameter

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Probabilistic prediction of the spudcan extraction from sand-over-clay based on monitored data

Capacity of spudcan foundation on dense sand overlying clay under combined loading

Undrained Bearing Capacity of Spudcan under Combined Loading

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Evolution of breakout force with operation period for deeply embedded spudcan in clay

Experimental modelling of spudcan penetration in spatially variable soils

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

Field experimental investigation of punch-through for different operational conditions during the jack-up rig spudcan penetration in sand overlying clay

Research on the Influence of Spudcan Penetration and Extraction on Adjacent Platform Piles in Sand

Effects of spudcan installation processes on the bearing capacity of foundations under combined loading in soft-over-stiff clay