Abstract:Hydraulic fracturing pressure is one of the key criteria in defining the pumping schedule and in dimensioning surface plants for fracturing operations. However, it is difficult to predict at a practical field scale due to the complex determining factors, involving geological, hydrodynamic and rock mechanical parameters. This study proposes a synthetic data-driven workflow, integrating both hydrodynamic and rock mechanical models, to predict the pressure based on fracturing experience in neighboring wells. The data quality and performance of the geological, hydrodynamic and rock mechanical features are evaluated based on a backward elimination strategy and control variate method, using error evolutions as criteria. Relatively small errors (root mean square error 5.1 ~ 5.7 MPa and mean absolute error 5.6 ~ 8.3%) are returned for wells/cases within the same region as the training wells, demonstrating the superior performance of the workflow. The prediction errors increase significantly with increasing distance between training and testing wells – defining the range of applicability of the workflow. The rock mechanical feature (represented by the brittleness index) provides a larger contribution to the prediction than that of the hydrodynamic feature (represented by the proppant accumulation) in most of the testing cases. Young's Modulus exhibits a higher performance (induces the smallest errors in pressure prediction) to characterize the rock mechanical feature of the formation, compared with the brittle mineral ratio and Poisson's Ratio. The data quality of geological stresses and Poisson's Ratio may require improvements based on the irregular error evolutions. The remaining errors and proximity/regional limitations of the data-driven workflow are critically discussed. This new method provides a platform for the prediction of pressures at field-practical scales, which may be significant for both hydraulic fracturing and geological storage of CO 2 and H 2 in depleted reservoirs with sufficient historical hydraulic fracturing records.

Probabilistic prediction of spudcan peak penetration resistance based on parameter estimation and sectionalized adaptive linear simplification

Bayesian prediction of peak resistance of a spudcan penetrating sand-over-clay

Probabilistic Punch-Through Distance for A Spudcan Penetrating Sand-Over-Clay

Improved Prediction of Peak Resistance for Spudcan Penetration in Sand Layer Overlying Clay

Predicting the ultimate bearing capacity of spudcan in stiff-over-soft clay based on a failure model varying with soil parameter

Probabilistic prediction of the spudcan extraction from sand-over-clay based on monitored data

Investigation of the peak punch-through capacity of spudcan on sand overlying spatially variable clay

Probabilistic Site-Characterisation Using Monitored Spudcan Installation Data

Field experimental investigation of punch-through for different operational conditions during the jack-up rig spudcan penetration in sand overlying clay

Quantifying Installation Risk During Spudcan Penetration

Capacity of spudcan foundation on dense sand overlying clay under combined loading

Case study of spudcan punch-through in layered soil with interbedded thin stiff clay

Parameter-Estimation-Based Gain-Scheduling Control of Weight on Bit in Drilling Process With Uncertain Penetration Resistance Coefficient

Prediction of rate of penetration based on drilling conditions identification for drilling process

Optimization of spudcan penetration and influence on caisson foundation

Multi-objective Optimization-Based Prediction of Excavation-Induced Tunnel Displacement

Numerical modelling of sand plug formation during punch-through of a spudcan footing

Probabilistic Prediction Method of Formation Pore Pressure

Prediction of Pipe-Jacking Forces Using a Bayesian Updating Approach

Determination of the ultimate consolidation settlement of jack-up spudcan footings embedded in clays

Prediction of Fracturing Pressure and Parameter Evaluations at Field Practical Scales