Abstract:The piezocone (CPTu) dissipation test is used to characterize how the applied load from the penetrating cone is distributed between the soil and pore fluid during both penetrometer advancement and when penetration is paused. The coefficient of consolidation is often estimated from CPTu dissipation tests by interpreting the rate of excess porewater pressure ( ∆u ) decay to static conditions during a pause in cone penetration. Most CPTu dissipation test interpretation methods are based on Terzaghi consolidation theory for ∆u dissipation at the cone shoulder ( u2 position) or cone face ( u1 position) and assume that radial ∆u dissipation dominates the response. However, several recent studies show that vertical ∆u migration does contribute to the response. This study uses a large deformation direct axisymmetric cone penetration model to characterize the soil-water mechanical response during CPTu dissipation tests, and in particular, the role of vertical ∆u dissipation on the response at the u1 and u2 positions. Large deformations around the penetrating cone are accommodated with an Arbitrary Lagrangian Eulerian approach. Soil behavior is modeled with the MIT-S1 constitutive model calibrated for Boston blue clay (BBC) soil behavior. ∆u dissipation following undrained cone penetration is simulated with coupled consolidation for BBC with over-consolidation ratios (OCR) of 1, 2, and 4 and a range of hydraulic conductivity anisotropy. The simulated u1 and u2 dissipation responses are presented to study how they are affected by OCR and hydraulic conductivity anisotropy. A correction factor is recommended to account for hydraulic conductivity anisotropy when interpreting the horizontal coefficient of consolidation from CPTu dissipation tests.

Interpretation of Piezocone Penetration Tests in Centrifuge

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Interpretation of centrifuge CPT data in normally consolidated silica and carbonate sands

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

A Penetration Processing Study of Piezocone Penetration Test in Cutoff Wall

A numerical investigation on the effect of rotation on the Cone Penetration Test

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

Analysis Of Consolidation Processing Of Piezocone Penetration Test In Cutoff Wall

A new shared miniature cone penetrometer for centrifuge testing

Numerical simulation of cone penetration test by using CFD–DEM coupled analysis

Effect of Penetration Rates on the Piezocone Penetration Test in the Yellow River Delta Silt

Effect of Cone Diameter on Determination of Penetration Resistance Using a FCV

Investigation of piezocone dissipation test interpretation in clay accounting for vertical and horizontal porewater pressure dissipation with a large deformation axisymmetric penetration model

Discrete element model (DEM) simulations of cone penetration test (CPT) measurements and soil classification

Numerical study of piezoball dissipation test with penetration under partially drained conditions

Discrete element modelling of rotary CPT and its applications

Experimental and Numerical Study of Rate Effect in Cone Penetration Tests

Time-Dependent Cone Penetration Resistance of a Postliquefaction Sand Deposit at Shallow Depth

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

An Approach to Evaluate Hydraulic Conductivity of Soil Based on Cptu Test

FEM-DEM Coupled Modeling of Cone Penetration Tests in Lunar Soil