Abstract:H-diamond MOSFETs with ZrO2/Al2O3 gate dielectric stacks were fabricated using an electron beam (EB) evaporation technique. The fixed positive charge in the ZrO2 contact layer depleted the two-dimensional hole gas to achieve normally off operation. Thanks to the leakage suppression of Al2O3 blocking layer, the device exhibited a considerably low gate leakage current of 1.8 x 10-6 A/cm2 at VGS = -5 V. Contributed from the relatively lower estimated interfacial state density (1.45 x 1012 cm-2 eV-1) and uncontaminated ZrO2/Al2O3 gate interface, the maximum mobility was estimated to be 345.8 cm2/V center dot s at VGS of -2 V, indicating excellent interfacial property of ZrO2/H-diamond. The hole mobility remains an almost constant of about 150 cm2/V center dot s for -4 V <= VGS <= -7 V. The maximum drain current density with 6 mu m-gate length was -112 mA/mm at VGS of -7 V. These results will provide an approach for fabricating high-performance H-diamond FETs.

Improved Performance of H-Diamond Mosfets with Zro2/Al2o3 Gate Dielectric Stacks Deposited by Electron Beam Method