Abstract:Diamond is regarded as one of the most promising semiconductor materials used for high power devices because of its superior physical and electrical properties, such as wide bandgap, high breakdown electric field, high mobility, and high thermal conductivity. Highpower diamond devices are now receiving much attention. In particular, Schottky diode based on a metal/diamond junction has promising applications, and high breakdown voltage has been achieved, though unfortunately its forward resistance is high. In this paper, the first principles calculations are performed to study the electronic structure of interface and the Schottky barrier height of Al-diamond interface. The projection of the density of states on the atomic orbitals of the interface atoms reveals that the typical Al-induced gap states are associated with a smooth density of states in the bulk diamond band gap region, and these gap states are found to be localized within three atom layers. At the same time, electronic charge transfer makes the Fermi level upgrade on the side of diamond. Besides, the typical Al-induced gap state model gives a simple picture about what determines Schottky barrier height at Al-diamond interface, by assuming an ideal, defect-free and laterally homogeneous Schottky interface in which the only interaction comes from the decay of the electron wave function from the metal into the semiconductor, which in turn induces electronic charges to be rearranged in the region close to the interface. As for the electronic charge transfer, this potential shift can be extracted by subtracting the superimposed planar or macroscopically averaged electrostatic potentials of the Al and diamond surfaces (at frozen atomic positions), from the planar or macroscopically averaged potential of the relaxed Al-diamond interface. The electronic charge transfer suggests that the formation of an interface should be associated with the formation of new chemical bonds and substantial rearrangements of the electron charge density. Especially, we obtain the Schottky barrier height of 1.03 by the first principle, which is in good agreement with the results from phenomenological model and experiment. The research results in this paper can provide a theoretical basis for the research of the metal diamond Schottky junction diode, and can also give a theoretical reference for the research of the metal-semiconductor highpower device based on diamond material.

MOSFETs on (110) C–H Diamond: ALD Al2O3/Diamond Interface Analysis and High Performance Normally-OFF Operation Realization

Normally-Off Oxidized Si-Terminated (111) Diamond MOSFETs via ALD-Al 2 O 3 Gate Insulator With Drain Current Density Over 300 mA/mm

C-Si Interface on Sio2/(111) Diamond P-Mosfets with High Mobility and Excellent Normally-Off Operation

C-Si interface on SiO2/(1 1 1) diamond p-MOSFETs with high mobility and excellent normally-off operation

An enhanced two-dimensional hole gas (2DHG) C-H diamond with positive surface charge model for advanced normally-off MOSFET devices

High Performance of Normally‐On and Normally‐Off Devices with Highly Boron‐Doped Source and Drain on H‐Terminated Polycrystalline Diamond

Preparation of High Conductivity Hydrogenated Silicon-Doped Diamond and MOSFET

Electrical Characteristics of Diamond MOSFET with 2DHG on a Heteroepitaxial Diamond Substrate

H-Terminated Diamond MOSFETs on High-Quality Diamond Film Grown by MPCVD

Oxidized-silicon-terminated Diamond p-FETs with SiO 2 -fiNing Shallow Trench Isolation Structures

1 W/mm Output Power Density for H-Terminated Diamond MOSFETs with Al2O3/SiO2 Bi-Layer Passivation at 2 GHz

Interface Electronic Structure and the Schottky Barrier at Al-Diamond Interface: Hybrid Density Functional Theory Hse06 Investigation

Performance of normally off hydrogen-terminated diamond field-effect transistor with Al2O3/CeB6 gate materials

HfAlOx/Al2O3 Bilayer Dielectrics for a Field Effect Transistor on a Hydrogen-Terminated Diamond

Normally-off C-H Diamond FETs with Partial Al/C-O Diamond Junction Attaining Low Off-State Current

Recent progress in diamond-based MOSFETs

Vertical-type two-dimensional hole gas diamond metal oxide semiconductor field-effect transistors

Ultrahigh On/Off Ratio (110) Diamond Transistors with Exceptional Reproducibility of Normally Off Characteristics

Gate leakage suppression of normally-OFF diamond FET by employing MOS-MES hybrid gate structure

Investigations on In0.12Al0.88N/AlN/AlxGa1−xN/In0.12Al0.88N MOS-HFETs With Symmetrically-Graded Wide-Gap Channel and Drain Field-Plate Design

Control of the Alumina Microstructure to Reduce Gate Leaks in Diamond MOSFETs