Abstract:Introduction Creating three-dimensional patterned nanoarchitectures on the surface of a substrate is an essential step towards the investigations on their novel properties and the developments of nanomaterials and nanodevices at different length scales. Patterned nano-architectures composed of one-dimensional (1D) nanowires/nanotubes on two-dimensional substrates always exhibit tailored mechanical, thermal, catalytic or optical properties. Among various 1D nanomaterials, carbon nanotube (CNT) is one of most attractive building blocks because of their unique properties originating from the small size, cylindrical structure, and high aspect ratio. If CNTs can be controllably patterned into 3D nanoarchitectures, they will hold promise for a variety of applications in intelligent nanocomposites with hydrophobic surfaces, field emission display, energy conversion and storage, sensor, and catalysis. The construction of patterned CNT architectures generally relies on the fabrication of patterned catalyst layers or substrates through complicated procedures. Shadow mask, block copolymer micellar films, soft-lithography, and photolithography, were used to pattern iron catalysts for the self oriented growth of CNT architectures [1]. Recently, numerous works on CNT growth with multi-composition catalysts were reported [2], and it was noticed that the growth of CNTs were sensitive to the catalyst composition. Herein, we proposed the gas-phase transfer process of a second phase metallic composition to modulate the activities and controllably construct the CNT architectures. The appearance of small amount additives may great change the activities of catalyst for CNT growth by over an order of magnitude. As shown in Fig.1. During the annealing process, the compositions on the covering mask were sublimated onto the Fe catalyst layer, which tuned the catalytic activities for

The Formation of Recumbent Bamboo-Like Carbon Nanotube Patterns on a Patterned Gold Substrate by Chemical Vapor Deposition

Large‐Scale Synthesis of Rings of Bundled Single‐Walled Carbon Nanotubes by Floating Chemical Vapor Deposition

Investigation of the Fabrication and Structure of Double-Wall Carbon Nanotubes

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Growth of Patterned and Aligned Carbon Nanotube Bundles on Micro-Structured Substrate

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Morphology of Carbon Nanotubes Prepared by Carbon Arc

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Patterned Growth of Well-aligned Carbon Nanotube Arrays on Quartz Substrates by Chemical Vapor Deposition

Patterning of three-dimensional carbon nanotube architectures by a composition transfer approach

Fabrication of the Carbon Nanotubes with Small Pits or Embedded by Nanoparticles Via Template-Assisted Method

Selective Growth of Carbon Nanotube on Silicon Substrates

Patterning and growth of carbon nanotubes on a highly structured 3D substrate surface

Direct Growth of Three-Dimensional Multicomponent Micropatterns of Vertically Aligned Single-Walled Carbon Nanotubes Interposed with Their Multi-Walled Counterparts on Al-Activated Iron Substrates

Experimental studies of the formation process and morphologies of carbon nanotubes with bamboo mode structures

Patterning of hydrophobic three-dimensional carbon nanotube architectures by a pattern transfer approach.

Organizing Single-Walled Carbon Nanotubes on Gold Using a Wet Chemical Self-Assembling Technique

Zigzag Assembly of Carbon Nanotubes Inside Au Microtrenches.

Patterned carbon nanotubes fabricated by the combination of microcontact printing and diblock copolymer micelles.

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

A Magnetism-Assisted Chemical Vapor Deposition Method to Produce Branched or Iron-Encapsulated Carbon Nanotubes