Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

From Carbon Nanotube Crystals to Carbon Nanotube Flowers

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Tunable Self‐Assembly of Carbon Nanotubes on Silica Surface

Film growth of pillars of multi-walled carbon nanotubes

CVD Growth of N-Doped Carbon Nanotubes on Silicon Substrates and Its Mechanism

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

The influence of ethanol on the growth and structure of carbon nanotubes

Substrate-Site Selective Growth of Aligned Carbon Nanotubes

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

Microstructure Control of Fe Catalyst Films for the Growth of Multiwalled Carbon Nanotube Arrays

Rational Control on Floating Catalysts for the Growth of Carbon Nanotube Assemblies: from Vertically Aligned Carbon Nanotube Arrays to Carbon Nanotube Films

Effect of Hydrocarbons Precursors on the Formation of Carbon Nanotubes in Chemical Vapor Deposition

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

Direct Growth of Carbon Nanotube Junctions by a Two-Step Chemical Vapor Deposition

Growth of Straight Carbon Nanotubes by Simple Thermal Chemical Vapor Deposition

Compound growth and microstructure of carbon nanotube

TEM Investigation on the Growth Mechanism of Carbon Nanotubes Synthesized by Hot-Filament Chemical Vapor Deposition.

Modulating the Diameter of Carbon Nanotubes in Array Form Via Floating Catalyst Chemical Vapor Deposition