Abstract:Sub-micro spinel-structured LiMn1.5Ni0.5O4 material was prepared by a spray-drying method. The electrochemical properties of LiMn1.5Ni0.5O4 were investigated using Li ion model cells, Li/LiPF6 (EC+DMC)/LiMn1.5Ni0.5O4. It was found that the first reversible capacity was about 132mAhg−1 in the voltage range of 3.60–4.95V. Ex situ X-ray diffraction (XRD) analysis had been used to characterize the first charge/discharge process of the LiMn1.5Ni0.5O4 electrode. The result suggested that the material configuration maintained invariability. At room temperature, on cycling in high-voltage range (4.50–4.95V) and low-voltage range (3.60–4.50V), the discharge capacity of the material was about 100 and 25mAhg−1, respectively, and the spinel LiMn1.5Ni0.5O4 exhibited good cycle ability in both voltage ranges. However, at high temperature, the material showed different electrochemical characteristics. Excellent electrochemical performance and low material cost make this spinel compound an attractive cathode for advanced lithium ion batteries.

Studies of Spinal Li 1+x Mn 2-X O 4 Rechargeable Lithium Ion Battery

Dependence of Battery Performance of Spinel Li{sub 1+x}mn{sub 2}o{sub 4} on the Preparation Method

Structure Change of Orthorhombic LiMnO2cathodes During Electrochemical Cycle for Rechargeable Lithium Battery

Studies on the LiMnO spinel system (obtained from melt-impregnation method) as positive electrodes for 4 V lithium batteries. Part III. Characterization of capacity and rechargeability

Studies on LiMnO spinel system (obtained from melt-impregnation method) as a cathode for 4 V lithium batteries Part II. Optimum spinel from γ-MnOOH

Studies of spinel LiCrxMn2−xO4 for secondary lithium battery

Synthesis and Electrochemical Properties of Sc-Doped Li1.05scxmn2-Xo4 Spinel As Cathodic Material for Rechargeable Li-Battery

Evolutions of Phase and Microstructure of Orthorhombic Li1-xMnO2 (0 <= x <= 0.95) during the First Charge Process

Preparation and Electrochemical Properties of X Li 2 MnO 3 ·(1- X )limn 2 O 4 Composites

Studies on an LiMnO Spinel System (obtained by Melt-Impregnation) As a Cathode for 4 V Lithium Batteries Part 1. Synthesis and Electrochemical Behaviour of LixMn2O4

Electrochemical lithium intercalation in nanosized manganese oxides

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Dependence of Battery Performance of Spinel Li1+XMn2O4 on the Preparation Method

IR Investigation and Electrochemical Properties of Li-doped Spinel Li 1 + x Mn 2 – x O 4 Prepared by a Simplified Technique

Insight into fine structures of LiFexMn1-xO2 by synchrotron radiation-based X-ray absorption spectroscopy

Spinel Li1 + Xmn2o4 Synthesized by Coprecipitation As Cathodes for Lithium-Ion Batteries

Optimization of Spinel Li[sub 1+x]Mn[sub 2−y]O[sub 4] as a 4 V Li-Cell Cathode in Terms of a Li-Mn-O Phase Diagram

Electrochemical performance of rare-earth doped LiMn2O4 spinel cathode materials for Li-ion rechargeable battery

Preparation and electrochemical properties of cathode materials Li1+xMn2O4 for lithium ion batteries